i hear ya ! my wife sits right seat....and NOTHING irritates me more than to see her head bobbing/nodding off - i say get the hell in the back, lay on a couch or go sleep in the BED....cause your distracting the HELL outta me while i drive !

Mounted the rear LED lights and also got the rear upper camera mounted. Going down to the shop when it gets dark and check them out. They put out 1800+ lumens each. Like 18 watts. And got some painting started.

Those lights should work well for you! Post a picture of them in action!!:D

We will see. My plan is to use 4 down the side under the Awning if the test goes well. Going to try a dimmer on the Awning lights. Don't want the operating room look ?
Randy

man thats a LOT of (white) light on the back.

White is right !

Here are the shots from tonight's test. What do you think ?

And from the cab it would be a big help backing up. I didn't have the camera's working to see how much it would help them ?
Randy

its nice ! I agree when backing at night it would be really nice.
Ive been considering adding some to our coach so that i can use them to check on the trailer or toad when towing / running at night.

They would be a tremendous help for backing up at night. Once the cameras are operational you should be in good shape for night time operations.

Some air install. I have been having a valve in the dryer system stick. Just old. Like me !

So I installed a new dryer today.

Also got the AV cables to the front of the cab. Need about 6' more on the longest run. Going to look-into building one ?

Also moved the cab pump to the driver's side. Going to go with a stack and it was in the way.

AV wires and mounting plate for air..

Just curious, why not put the dryer and tank under the truck?

Most of the space is taken. But the gap at the cab and box just seamed right and easy to get to ! Oh, the old cooler/dryer was mounted to a stand back their and I could reuse the hose system .

On a side note the water heater is going under the passthrough. Will start that when the heater gets here.

I figured it was a simple explanation. Thanks!

Some wiring. Its a pain with the LED dimmer. 2 extra lines .

Awsome job, glad I checked back in, lots of good things I would have missed....

The end of a long week. Some more wiring and the carnage on the floor.:D

Going to switch to some pluming next ? And some painting on the rear uprights/door frame.

Water heater got here today. Its a tank-less for LP. Test fit went well. Don't think it could be run with the truck underway,may not draft right ? So I will only use it parked. Should have good assess to fittings and drain's.
Randy

that flue / vent stack doesn't need to be clear on all sides ?

Going to try it and see if we need to go up ?

I strongly recommend you lengthen the vent on it. You are going to have draft issues and you will be getting the wall of the camper real hot.