Truck Conversion & Toterhome Community - View Single Post

solo318 · 10-27-2016, 01:40 PM

Once we got the main floor down It was time for the slide floor. After laminating a 4x12 ft sheet of 1 inch plywood, I covered it with the same black plastic stretched and glued in place. I then screwed the floor into the 1x2 box tubing sides.

Click image for larger version

Name: 20161027_142914.jpg
Views: 7
Size: 93.3 KB
ID: 2424

Click image for larger version

Name: 20161027_142918.jpg
Views: 6
Size: 102.8 KB
ID: 2425

Next we used 3m vhb tape to attache the side of the slide.

Click image for larger version

Name: 20160827_202807.jpg
Views: 5
Size: 75.7 KB
ID: 2426

Click image for larger version

Name: 20160827_202820.jpg
Views: 5
Size: 67.0 KB
ID: 2427

Click image for larger version

Name: 20160827_202835.jpg
Views: 7
Size: 80.4 KB
ID: 2428

Sorry about the dar pics. It was a pretty late finish.

10-27-2016, 01:40 PM	#30
solo318 Senior Member Join Date: Jul 2015 Location: Central Florida Posts: 127	Once we got the main floor down It was time for the slide floor. After laminating a 4x12 ft sheet of 1 inch plywood, I covered it with the same black plastic stretched and glued in place. I then screwed the floor into the 1x2 box tubing sides. Next we used 3m vhb tape to attache the side of the slide. Sorry about the dar pics. It was a pretty late finish.