Thanks Don.
Been working on some landing gear. Had some #10,000 jacks that I used on some thing ? Got a pair of scissor's jack motors with 3/4 hex drives. Used a G'8 bolt to take the place of the jack crank, drilled a hole for the pin and welded up a bracket to hold the motor. Still working out best placement ? Thinking the outer rear box as in the photo.
Testing has proved that the motors are,lets just say under-powered. But with the emergency drive it works just fine. May rethink the electric motor but ?
It would give me a little bit of adjustment L & R of off level . My chassis sits very flat but its the RV sites and any wind ?
Randy
|