everything ive used is properly rated for GAS - i was certain to use black pipe & black pipe elbows etc - (I understand that galvanized pipe will corrode when used w/ LP/NG).
the copper pipe i used (and flared) has been leak tested (several times at every joint) using a sniffer & bubbles. i was certain to use gas rated thread sealant on any joints (except the flare)
im using c02 & LP detectors as well.
__________________
Don R.
'04 Haulmark (M42386) 42', 2 slide, 10kw - Pictures
'04 F350 CrewCab Longbed 4x4, 50g aux tank & gear vendors dbl over
|