Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×


Join Truck Conversion Today
Reply
 
LinkBack Thread Tools Search this Thread Display Modes
 
Old 07-11-2010, 05:23 PM   #1
Junior Member
 
Join Date: Jul 2010
Posts: 7
Default

I am looking into building my own conversion. I have a 2000 Pete 379 with a c-13 cat in it. Has a 43" bunk on it. I believe. Its not the 70 inch bunch. Would I be better off removing the bunk and putting a box on it or leaving it on there. Or Take it off and have somebody like Hawk Engineering build a sheel. I want to do all of the finish work inside my self to keep cost down. I have no idea what it will cost thats really what I am looking for is a ballpark. Already have truck. Dont need anything fancy. Would like around 30 ft of living space with one or two slide outs. Any suggestions or hints would be help full.
Thanks
__________________

penningta is offline   Reply With Quote
Old 07-11-2010, 08:30 PM   #2
Senior Member
 
blizzardND's Avatar
 
Join Date: Mar 2008
Location: West Fargo ND
Posts: 300
Default

A Pete 379 would make a cool conversion.



I can't tell you one way or the other about removing the sleeper, pro/cons pro- it adds a sleek aero transfer from the cab to the box, cons, you loose a few valuable sq ft particularly if you are thinking a lounge slide out.

As for build it yourself or farm it out?
Farm it out!! to someone like Hawk, SpaceCraft or a few others they have the expertise to stretch the truck, design in the ft/rear balance and build leak free slide outs. Once the box is built, wired, plumbed, and insulated you can then install the cabinets, flooring and wallboard. As well as trim and soft goods like curtains, interior doors, beds and sofa sleepers.

I would not attempt to build one from scratch for 2 reasons.

1) it takes too much time, a to learn everything you need to know just to design the truck, then the time and shop space it takes to construct the truck is incredible. Room for all the parts, a high ceiling to work on the roof etc. When you are all done you will think that with all you learned by mistake that perhaps you should build a second one just to use all your new knowledge and newly learned skillz.

2) Money and resale. It will cost you twice what you originally budget. If you are thinking 30' figure 80-100 grand to start. 3,000 bucks a foot without slides. Hawk and Spacecraft can give you good solid bids to get it to my above stage. From there you can use conventional pricing for the finish. Shop Menards, Home Depot, Lowes etc. to figure how much your shower, sinks, beds, countertops cabinets and flooring will cost.

Before you start anything have those finish numbers to add to your Hawks bid, don't forget to add in the truck cost, then decide whether you want to spend a year building (finishing) your truck or just spend a weekend on Racing Junk to pick out a completed unit for a 40% off, truck short sale and be trucking by the next weekend.

I mentioned resale, by having a coach builder build your box you can at least sell your project completed or where you give up with a brand to attract a potential buyer.

Does this make sense?

I just type as thoughts come to me- I hope you understand. You can search my project here and follow the whole build over on my escapees post, to give you an idea of how my thoughts have been backed up by 2 years of rookie RV manufacturing experience learned the hard way.

Good luck, looking forward to seeing your layout plans.
-blizz
__________________

__________________
2001 GMC 6500 Topkick, 22' box, dropped frame, designed to fit into a 9' garage door. 3126 CAT 6spd Man Lo-Pro 19.5's w/ 3.07 rear axle ratio
blizzardND is offline   Reply With Quote
Old 07-12-2010, 05:46 AM   #3
Junior Member
 
Join Date: Jul 2010
Posts: 7
Default

I have the truck. So what you are saying is that we will have 80,000 in just the box. or that is eveything inside of it.
penningta is offline   Reply With Quote
Old 07-12-2010, 06:13 AM   #4
Member
 
Join Date: Jul 2007
Location: MO
Posts: 93
Default

Pen,
Bliz gives some good advice in the above response.

Some other things to consider when building a conversion is the order in which you do things. When Hawk did our conversion the last thing he did after all of the walls are built, doors and cabinets hung, HVAC, electric 120/12v and water lines run is to skin the outside of the coach. This keeps it easy to make any changes and 100% test all of the systems with the interior completely finished. This requires a building to house and work on the coach.

Having built my home and my other RV, like Bliz, I started down this road with the same idea you expressed in your first post...to build my own. The bottom line - when I really worked on the plan / schedule, I realized that it would be years before we ever got to use the coach. Now that we are done I am glad we had it built to 90+ % complete. With all of the other things I wanted to add, the pre trip prep and post trip cleanups, I am more than busy and it feeds my “need to build” and then some with no problems.

My experience is $3k/ft to $5K/ft for top-end finish and that is why a used finished truck remodeled by yout to meet your needs starts to look pretty good. However if you want something that is your-own and built just for your purpose...NOTHING beats building your own. That is what we did, and we paid to build it just the way we wanted it and I would do it that way again if I could.

Good luck with however you choose to proceed...

Rad
__________________
T2000 Complete (but never finished)
Radman is offline   Reply With Quote
Old 07-12-2010, 06:22 AM   #5
Junior Member
 
Join Date: Jul 2010
Posts: 7
Default

Yeah that makes sense. I was leaning toward having someone build the box. We have a wood shop that makes cabinets and eveything like that. Thats why I was leaning toward just having the box built. Being that my dad is a truck driver and I am too on the side. We are thinking about building it together. So we both can use it. It will be overkill for what we do. But they just look awsome. I will pull a 18ft or so trailer with a Trans am behind it so its not like we need that big of truck. I just hate to see the truck go to waste. Its too good of truck for that. We have access to a great 379 pete and was looking into building a conversion. Any idea what it cost per foot just to have them built the box. Im in now hurry on the build. It can take a few years. I would like to just have it built but I dont think I can swing all of that if you know what I mean.
penningta is offline   Reply With Quote
Old 07-12-2010, 06:23 AM   #6
Junior Member
 
Join Date: Jul 2010
Posts: 7
Default

also Radman do you have any pics of you truck
penningta is offline   Reply With Quote
Old 07-12-2010, 07:16 AM   #7
Senior Member
 
Bob86ZZ4's Avatar
 
Join Date: Feb 2009
Location: St. Paul, MN
Posts: 1,819
Default

I'm kind of on the side of buying a used one for a terrific deal too. But I can understand your position. I think the one thing Blizz was talking about is the cost of the truck, even tho you have it, it does have value just as it sits and could be sold outright. So, you can't just figure you've got a free truck. You could sell it and use that money toward a completed truck. I think that might be what he meant.

Back to the original post. I like the idea of taking that short sleeper and turning it into passenger seats. Put some nice big windows on each side. 3 captains chairs across and leave enough room for a walkway between them. 1 on 1 side and the two together over toward the other side. Or you could get a jacknife sofa in there and get one narrow enough to walk past on one side into the living quarters? That'd give you another bed. Or two small jacknife sofas on each side that come together for a bed as in this coach: www.balinfamily.com I think that looks like a cool way for friends to ride and add sleeping. My coach was made on a day cab and it's kind of seperate between the living quarters and the cab. Makes it hard to conversate with passengers.
__________________
'03 Freightliner FL112, 295" wheel base, with '03 United Specialties 26' living quarters, single screw, Cat C12 430 h/p 1650 torque, Eaton 10speed , 3.42 rear axle ratio
Bob86ZZ4 is offline   Reply With Quote
Old 07-12-2010, 07:41 AM   #8
Member
 
Join Date: Jul 2007
Location: MO
Posts: 93
Default

Penn,
Email me off line with your reply address and I will send some to you. I dont have any posted on the site. And you can see some pics of it at Hawk Enginnering's or Craftsman Ind's Website.

To Bob's note, we did 2-captains chairs with swivels on one side and a Jack Knife sofa on the other side (with a flat screen) of our 75" sleeper. It works great when traveling with my buddies and then makes into a dinette or sleeping area. This is an area that we spend lots of time in on the road and it was esentally "FREE" with the truck. At $3-$5K per foot that's $18K +...but you still need to finish it out.

Rad
__________________
T2000 Complete (but never finished)
Radman is offline   Reply With Quote
Old 07-12-2010, 03:09 PM   #9
Junior Member
 
Join Date: Jul 2010
Posts: 7
Default

Thats not that bad. I dont think I would even have them stretch it out at all. With sleeper I could get a 18-10 box. It would have about 4-5 ft overhang. But that shouldnt hurt anything. I really dont need all that fancy stuff inside right away either. Just a place to cook, sleep, and bath. Can you buy water tanks and thinks like that or do you have Hawk do that also.
penningta is offline   Reply With Quote
Old 07-14-2010, 03:44 PM   #10
Senior Member
 
Bob86ZZ4's Avatar
 
Join Date: Feb 2009
Location: St. Paul, MN
Posts: 1,819
Default

Don't forget what Blizz said, it'll cost you twice what you think it will to build yourself. At least twice I'd say.
__________________
'03 Freightliner FL112, 295" wheel base, with '03 United Specialties 26' living quarters, single screw, Cat C12 430 h/p 1650 torque, Eaton 10speed , 3.42 rear axle ratio
Bob86ZZ4 is offline   Reply With Quote
Old 07-14-2010, 08:57 PM   #11
Senior Member
 
blizzardND's Avatar
 
Join Date: Mar 2008
Location: West Fargo ND
Posts: 300
Default

If ya wanna build it cheap, heres is one of my old plans e,f or g...

Go to the local rv dealership, figure out your cab to axle length and how much you'd weld on the rear of the frame to help relieve the front axle balance.

Then find a used class C (or even an A if ya cut the cab section off) motorhome with engine trouble or a nice pull type camper remove the camper or box off the frame of the original unit and set it on your truck, with some big tool boxes under the body, then re sheet or re-paint every thing to match, and you are good to go.

I'm thinking a big class B box would be a pretty close fit if you simply cut the overcab section off. The pricing on those class b's older models with litle or no use over the last 10-15 years is almost free after you sell the cab / chassis after the removal of the camper box.

Some of these can look really good, others really back woods redneck. Not that there is anything wrong with either, I'm sure even the crudest design could be fun to party in.

-blizz
__________________
2001 GMC 6500 Topkick, 22' box, dropped frame, designed to fit into a 9' garage door. 3126 CAT 6spd Man Lo-Pro 19.5's w/ 3.07 rear axle ratio
blizzardND is offline   Reply With Quote
Old 07-15-2010, 05:21 AM   #12
Senior Member
 
Doc Weaver's Avatar
 
Join Date: Jun 2008
Location: West Chester, Ohio
Posts: 483
Default

blizz, I have seen some of those camper/truck fusions that look very good too. I saw one locally that, I think, chopped up an old 5th wheel. The wheel wells even matched up. It looked nice; almost factory.

Doc Weaver
__________________
Doc Weaver '98 Freightliner FL60 pseudo toy hauler
Doc Weaver is offline   Reply With Quote
Old 07-15-2010, 07:38 AM   #13
Junior Member
 
Join Date: Jul 2010
Posts: 7
Default

Yeah Thanks for all the ideas. Im going to do some figuring and see what I want to do. I am very picky about looks. And from having a truck driver background with the Pete its got to look good. Drop visor, Texas bumper, chicken lights the whole nine yards. Any way thanks again. I will probably call Hawk and see what they get fot around a 18 to 20 ft box with all the water tanks and pumps mounted up. Thanks Again
penningta is offline   Reply With Quote
Old 07-15-2010, 07:42 AM   #14
Senior Member
 
blizzardND's Avatar
 
Join Date: Mar 2008
Location: West Fargo ND
Posts: 300
Default

just thinking how a polished airstream trailer would look on a old 50's vintage HDT like a big tanker.
that would be different!
-blizz
__________________
2001 GMC 6500 Topkick, 22' box, dropped frame, designed to fit into a 9' garage door. 3126 CAT 6spd Man Lo-Pro 19.5's w/ 3.07 rear axle ratio
blizzardND is offline   Reply With Quote
Old 07-15-2010, 05:30 PM   #15
Junior Member
 
Join Date: Jul 2010
Posts: 7
Default

That would be different thats for shure. But I think it would look good.
penningta is offline   Reply With Quote
Old 10-31-2010, 04:15 PM   #16
Junior Member
 
Join Date: Jun 2010
Posts: 6
Default

Well guys, it's time for me to make a decision about accepting this truck. I think I'm going to take it. I like the idea of an airstream in place of the tanker, since mine is a tanker truck. I have two questions:

1. How big (length) of a conversion do I need to comfortably sleep six crewmembers?

2. I see the $3-5k per foot figure noted above for a high-end finish. Could I cut that in half for a basic no-nonsense conversion?

Thanks for any advice...
__________________

James2 is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 08:58 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×