Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×


Join Truck Conversion Today
Reply
 
LinkBack Thread Tools Search this Thread Display Modes
 
Old 01-30-2015, 11:33 AM   #1
Junior Member
 
Join Date: Jan 2015
Location: palmyra
Posts: 7
Default newbie and new build

Ok everyone lots of good input on here been looking for a while, we are looking to do a conversion on a hdt prefer a Volvo but does not have to be, what I do need is a decent medium sized sleeper that I can put seats in, also need an 8 to 9 foot flat bed with goose neck hitch, must be on the 400hp range with a manual transmission, I want to set this up with the right rear end gear to achieve the best mpg, will be towing our 40 foot horse trailer with living quarters approx. 21,000 lbs loaded with 3 horses and the dog and so on.

what is everyone's thoughts and suggestions
I plan to buy a single axle if I can find it not I will single a tandem.
I have looked at the LP MTD trucks and they are ridiculous in prices I can get an HDT for a lot less, not worried about the license or driving we farm and I have been in all kinds of trucks and tractors my whole life.

thanks in advance
__________________

hayseed is offline   Reply With Quote
Old 01-30-2015, 01:56 PM   #2
Senior Member
 
Join Date: Oct 2014
Location: Where my trailer is sitting!
Posts: 251
Default

A Volvo 780 would probably fit your desires. They have a larger sleeper and sometimes even come with a work station. A lot depends on your budget. You can find high mileage ones for under $20k or go above $100k. Just one question though, why is a manual a must? The auto shift transmissions seem to do quite well, but obviously the choice is yours. With the load you are talking about the taller the gears the better for economy and the display on the newer trucks even have an economy meter built in.
__________________

__________________
For now 1996 Dodge Ram 5.9 Cummins 365HP 830TQ pulling a 2006 28' Dutchmen Fifthwheel and at times a 16' boat behind that!
Mntom is offline   Reply With Quote
Old 01-30-2015, 02:07 PM   #3
Junior Member
 
Join Date: Jan 2015
Location: palmyra
Posts: 7
Default

Thanks I am leaning towards a Volvo and I had already plan on changing the rear end gear to like a 2:85 or so waiting to see engine and transmission combo before I decide on the rear end gear. I choose a manual because I am not a fan of the auto or automated transmissions, just my choice
hayseed is offline   Reply With Quote
Old 01-30-2015, 02:12 PM   #4
Senior Member
 
Join Date: Oct 2014
Location: Where my trailer is sitting!
Posts: 251
Default

Quote:
Originally Posted by hayseed View Post
Thanks I am leaning towards a Volvo and I had already plan on changing the rear end gear to like a 2:85 or so waiting to see engine and transmission combo before I decide on the rear end gear. I choose a manual because I am not a fan of the auto or automated transmissions, just my choice
I have been watching what was for sale as far as the Volvo trucks, and you shouldn't have any problem finding one that suits your needs except for the gears. Most of the trucks would have a tough time with gears that high when they are working close to rated capacity.
I have no problem with a manual transmission either, but if by chance my wife needed to 'herd it' somewhere...... Well, let's just say it may get interesting...
__________________
For now 1996 Dodge Ram 5.9 Cummins 365HP 830TQ pulling a 2006 28' Dutchmen Fifthwheel and at times a 16' boat behind that!
Mntom is offline   Reply With Quote
Old 01-30-2015, 02:15 PM   #5
Junior Member
 
Join Date: Jan 2015
Location: palmyra
Posts: 7
Default

That should not be an issue for me or my wife she may just need a little getting used to the different feel it was a requirement lol...
hayseed is offline   Reply With Quote
Old 01-30-2015, 02:17 PM   #6
Senior Member
 
Join Date: Oct 2014
Location: Where my trailer is sitting!
Posts: 251
Default

My wife doesn't seem to grasp how easy the bigger trucks are to drive. Oh well, maybe when I get my truck she will understand, but then again, my little pick up is a challenge for her.......
__________________
For now 1996 Dodge Ram 5.9 Cummins 365HP 830TQ pulling a 2006 28' Dutchmen Fifthwheel and at times a 16' boat behind that!
Mntom is offline   Reply With Quote
Old 01-31-2015, 08:34 AM   #7
Senior Member
 
Bob86ZZ4's Avatar
 
Join Date: Feb 2009
Location: St. Paul, MN
Posts: 1,819
Default

Welcome to Truckconversion.net! You've figured it out. The MDT's are more expensive and less capable. Now, you are planning an "HDT," not exactly a "Truck Conversion." There is a very active group of people doing what you are planning, except they are pulling 5th wheel campers. They have a forum here: HDT - Escapees Discussion Forum

The first few sticky threads are chock full of great info for the HDT enthusiast.
The main forum there also has a rig for sale section that often has trucks already built and used for what you are planning. Most will have a 5th wheel hitch but a gooseneck could certainly be installed.

The other best source of info would be the HDT Rally . It's a great gathering of HDT (and some Truck Conversions too) where you could glean a ton of info. You can often drive peoples trucks and see how you like them. And there's nothing better than chatting endlessly with people that have been doing what you're planning for years and know a lot.
__________________

__________________
'03 Freightliner FL112, 295" wheel base, with '03 United Specialties 26' living quarters, single screw, Cat C12 430 h/p 1650 torque, Eaton 10speed , 3.42 rear axle ratio
Bob86ZZ4 is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 08:24 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×