|
|
Looks nice. Looks like you're going to use one of those metal spikes that pushes into a rubber stopper to keep it open? I didn't have much luck with that type on my rig. I switched to the plastic t-bar kind of thing with the plastic fitting on the door that you hook the bar into to keep it open. The rubber deal didn't hold good enough in the wind. I left the rubber deal on because it makes a good stopper when the door swings open so it doesn't smash into the siding. I bought the plastic bar thing slightly longer than the steel spike thing so when it's hooked open the steel spike thing doesn't quite reach the rubber thing.
|
We always put these on our race trailers. They work very well.
Steel 4" Tstyle Side Door Latch Holder Holdback Hook RV | eBay |
ditto on bmzero's opinion. I use the stainless t-bar style as well. Both my trailers that had the plastic bar failed and I switched to the metal one. I found that a strong wind pushing the door towards the trailer when latched open would flex the t-bar, then it would pop out when the wind blew the other way. The metal version is bullet proof.
|
Lots of progress this week and weekend. I'm very happy with the outcome so far. It isn't the Taj Mahal, but it's exactly the usable platform I had hoped for.
Door reinforced with 1-1/4" aluminum channel. This made a HUGE difference in the sold feel when shutting the door. https://farm4.staticflickr.com/3754/9...204bd3dc_b.jpg Bunk platform is complete. Next up for the bunk is insulating the walls, covering the walls with .040 aluminum, and covering the floor with the same aluminum. https://farm8.staticflickr.com/7387/9...8bb5ede7_b.jpg Entire ceiling has been insulated. https://farm3.staticflickr.com/2806/9...373c57da_b.jpg Interior lighting is mocked up. I still have to wire in the switches and 24V system. https://farm8.staticflickr.com/7304/9...420a7c5b_b.jpg |
Progress updates.
Wheels sand blasted and powder coated black. https://farm4.staticflickr.com/3777/9...d0da60c1_b.jpg Interior AC panel installed. Added a handful of AC outlets on the inside of the truck. https://farm8.staticflickr.com/7375/9...bbf5f090_b.jpg 24V/12V battery charger/maintainer and 3-bank battery status monitor installed. https://farm4.staticflickr.com/3707/9...b3b2239c_b.jpg |
Fridge/freezer
https://farm4.staticflickr.com/3754/9...20578ed2_b.jpg Fridge/freezer slide https://farm8.staticflickr.com/7416/9...556c2181_b.jpg Travel latch https://farm3.staticflickr.com/2893/9...7a67b18f_b.jpg |
Looking great.
|
where did you the slide brackets? by the way, you are doing a great job in short amount of time.
|
Quote:
I appreciate the compliments. I'm really happy with the way it's turning out. thanks, -b |
Thanks for the updates and images of your project. We are also looking at purchasing a 17' UHaul and are interested in updated pictures of your mounted compressor, tanks and generator.
|
i got mine at Cabinet Drawer Slides, Glides, Hinges, & Hardware | Shop, Buy and SAVE at DrawerSlides.com
iirc mine are rated for 500 lbs.....for our 63 quart 'lectic cooler (more than 100 cans w/ room to spare). https://www.truckconversion.net/attac...cd091ee288.jpg https://www.truckconversion.net/attac...edd93f8b5b.jpg https://www.truckconversion.net/attac...0bd072f9ec.jpg |
Quote:
friend of mine has the same cooler in his quigley van (e350)...he's had his 4 yrs and same thing - either on 12v or 110, never turned off. ours has been flawless - absolutely love not having to worry about ice or buying ice. |
what type of screws, rivets etc are you on the interior walls?
|
Quote:
Does that answer your question? |
bmzero,
Rig came out great. Question harkening back to your first post... where did you find the corner caps to replace the dented ones on the top of the UHaul box? Mine are all dinged and I'd love to replace but can't find em. thanks! |
Quote:
I am about to list this truck for sale. I'm going bigger. I got the corners at my local Uhaul store. They handle the repair work for the area. You can also get them here - https://epc.uhaul.com. |
Much thanks, and good luck with your next project. Looking forward to seeing it.
|
Quote:
Been at the dealership for the last few hours. Not a done deal yet. |
All times are GMT -5. The time now is 04:25 AM. |
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.