Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×


Join Truck Conversion Today
Reply
 
LinkBack Thread Tools Search this Thread Display Modes
 
Old 11-13-2016, 07:24 PM   #1
Junior Member
 
Hooter Shaker's Avatar
 
Join Date: Nov 2011
Location: East Texas
Posts: 20
Default 359 Race Rig

I thought I would share my project as we are nearing its completion. I purchased a 1979 Peterbilt 359 on Ebay. My wife and I race dirt bikes and travel once a month (sometimes more) to races and our plans are to be able to enjoy the races in comfort. The truck was delivered to my shop on a flatbed and was White and green, the truck had been used to move trailers around a yard, and had a recent in frame overhaul and new brakes. I immediately prepped the truck for paint and the cab was painted red and black. The next step was tackling the stretching of the frame. I talked with several shops to see how it was done and I purchased inner frame rails and spliced the outer frame rails and double framed it. The Hougen magnetic drill was an additional purchase to drill the holes in the frame. In all 60" was added to the length of the truck. After the completion of this step we spent some time working on suspension and the drive line of the truck. We went through and replaced all of the bushings in all of the drag links. Replumbed all of the air lines with poly tubing. The drive line was lengthened and balanced. At this point I had as much in the drive line as I did in the truck.

The story of this project will take a bit to tell.....more later.

Todd
Attached Thumbnails
IMG_20131103_125351_676.jpg   20150308_181928.jpg   20150228_093437.jpg   20150228_123125.jpg   20150302_174941.jpg  

__________________

Hooter Shaker is offline   Reply With Quote
Old 11-14-2016, 06:39 PM   #2
Senior Member
 
Bob86ZZ4's Avatar
 
Join Date: Feb 2009
Location: St. Paul, MN
Posts: 1,819
Default

Wow, looks cool. What are the plans for the box? Entire thing living quarters? Garage in back? Deck for gooseneck hitch? Landing pad for that helicopter?

Welcome to Truckconversion.net! Glad you're here. We also have a Facebook group: https://www.facebook.com/groups/452028681672329/
__________________

__________________
'03 Freightliner FL112, 295" wheel base, with '03 United Specialties 26' living quarters, single screw, Cat C12 430 h/p 1650 torque, Eaton 10speed , 3.42 rear axle ratio
Bob86ZZ4 is offline   Reply With Quote
Old 11-14-2016, 08:32 PM   #3
Junior Member
 
Hooter Shaker's Avatar
 
Join Date: Nov 2011
Location: East Texas
Posts: 20
Default More Details Post 2 - 359 Race Rig

Found a short box trailer and bought it, got it home and removed the box and put it on the stretched truck. The box had a lift on the back and I left that on to make it easier to move items in and out of the truck. (Welder, plasma cutter, wife when she was tired. etc.,) I had purchased an older camper and planned to use most of the windows from it. I also used it to see how the slide mechanism worked because I wanted to put at least two slides in this rig. One in the living area and one in the bedroom. The plan is to pull a trailer with the bikes, tools, and whatever else behind the motorhome.

My wife and I worked over some ideas on the layout and the largest issue we had was the rear wheels and the plumbing for the bathroom, specifically the down pipe for the black water tank. We did not want it between the rear wheels. After much measuring we managed to get it behind the wheels by sacrificing some of the bedroom size. We had wanted to put a king size bed, and decided a queen bed would work. We managed to get that all figured out and knew where we wanted the main door and started cutting. The door was first, then the area for the slides, and finally the windows. We saved as much of the existing side wall metal so we could reuse it. The slides on the old camper I bought were air powered but I decided to use hydraulics. The living area slide ended up being 12' wide with a 32" extension and the bedroom slide 7' wide and 24" extension.
Attached Thumbnails
20150319_143957.jpg   20150319_094934.jpg   20150319_191548.jpg   20150411_111228.jpg  
Hooter Shaker is offline   Reply With Quote
Old 11-15-2016, 10:32 AM   #4
Senior Member
 
Bob86ZZ4's Avatar
 
Join Date: Feb 2009
Location: St. Paul, MN
Posts: 1,819
Default

Cool. I like the lift on the back. Are you cutting out the back of the cab and front of the box so you can walk through? I can't tell from the pictures.
__________________
'03 Freightliner FL112, 295" wheel base, with '03 United Specialties 26' living quarters, single screw, Cat C12 430 h/p 1650 torque, Eaton 10speed , 3.42 rear axle ratio
Bob86ZZ4 is offline   Reply With Quote
Old 11-15-2016, 10:38 AM   #5
Senior Member
 
solo318's Avatar
 
Join Date: Jul 2015
Location: Central Florida
Posts: 127
Default

my wife and I fought with the black water tank as well. One solution we looked at was a short toile on an elevated platform with the black water tank above the floor instead of below it. In the end Ours worked out ok since I added to the box. But it def gave us more options.
solo318 is offline   Reply With Quote
Old 11-15-2016, 02:22 PM   #6
Senior Member
 
bushpilot's Avatar
 
Join Date: Jul 2011
Location: Tomball
Posts: 1,414
Default

nice build, WELCOME to the fray!
__________________
Don R.
'04 Haulmark (M42386) 42', 2 slide, 10kw - Pictures
'04 F350 CrewCab Longbed 4x4, 50g aux tank & gear vendors dbl over
bushpilot is offline   Reply With Quote
Old 11-15-2016, 09:53 PM   #7
Junior Member
 
Hooter Shaker's Avatar
 
Join Date: Nov 2011
Location: East Texas
Posts: 20
Default 359 Race Rig build

Yes, we have a cut out in the back of the cab so we can walk through to the box. My blue heelers travel with us and they like the roam while traveling. lol.

Now that I had all of the holes cut for the windows, slides, the door the framing for the slides started. I left both rear axles under the truck so I wasn't really worried about weight so I used 2" square tubing on most of it. We also started some work on the inside of the truck. We built the walls in between the different rooms. We decided to use pocket doors to help with space between the living area/kitchen and the bathroom and between the bath and bedroom. We purchased base cabinets and figured out where we wanted them set. My wife says she didn't think she would ever finish with the insulation. We used the insulating board in the ceiling and walls of the box, 2 layers of it. Since I had extra room I decided to put most of the wiring and duct work in a 1' space I left in the ceiling. It worked out real good for the wiring and made it easier as the build progressed. I left the bedroom ceiling full height and ran the wiring in the top of the entertainment center/dresser/storage.
Attached Thumbnails
20150301_081527.jpg   20150412_152158.jpg   20150412_092704.jpg   20150424_182419.jpg  
Hooter Shaker is offline   Reply With Quote
Old 11-16-2016, 09:02 PM   #8
Junior Member
 
Hooter Shaker's Avatar
 
Join Date: Nov 2011
Location: East Texas
Posts: 20
Default

The trailer behind the hootershaker is what I used for the Box its a 32 ft Great Dane trailer.
Attached Thumbnails
20141124_122343.jpg  
Hooter Shaker is offline   Reply With Quote
Old 11-17-2016, 08:24 PM   #9
Junior Member
 
Hooter Shaker's Avatar
 
Join Date: Nov 2011
Location: East Texas
Posts: 20
Default

more pictures of this project
Attached Thumbnails
20150310_112711.jpg   20150514_165707.jpg   20150411_135247.jpg   20150526_094124.jpg  
Hooter Shaker is offline   Reply With Quote
Old 11-18-2016, 06:28 AM   #10
Senior Member
 
bushpilot's Avatar
 
Join Date: Jul 2011
Location: Tomball
Posts: 1,414
Default

how many gallons are those holding tanks?
__________________
Don R.
'04 Haulmark (M42386) 42', 2 slide, 10kw - Pictures
'04 F350 CrewCab Longbed 4x4, 50g aux tank & gear vendors dbl over
bushpilot is offline   Reply With Quote
Old 11-18-2016, 05:47 PM   #11
Junior Member
 
Hooter Shaker's Avatar
 
Join Date: Nov 2011
Location: East Texas
Posts: 20
Default

The black water and gray water tanks are 80 gallon each. I have a 100 gallon fresh water tank.
Hooter Shaker is offline   Reply With Quote
Old 11-18-2016, 07:15 PM   #12
Senior Member
 
bushpilot's Avatar
 
Join Date: Jul 2011
Location: Tomball
Posts: 1,414
Default

sorry i didn't say it earlier - the build is nice keep the pictures coming.

regarding the tanks - WOW ! the reason i asked is because i thought the looked kinda small, that seems like a nice size. IIRC our are about 55 gal each w/ 220g of fresh water (2x110g).
__________________
Don R.
'04 Haulmark (M42386) 42', 2 slide, 10kw - Pictures
'04 F350 CrewCab Longbed 4x4, 50g aux tank & gear vendors dbl over
bushpilot is offline   Reply With Quote
Old 11-24-2016, 06:46 PM   #13
Junior Member
 
Hooter Shaker's Avatar
 
Join Date: Nov 2011
Location: East Texas
Posts: 20
Default

More pictures of build.
Attached Thumbnails
20150514_165751.jpg   20150516_184150.jpg   20150526_094103.jpg  
Hooter Shaker is offline   Reply With Quote
Old 11-24-2016, 06:58 PM   #14
Senior Member
 
bushpilot's Avatar
 
Join Date: Jul 2011
Location: Tomball
Posts: 1,414
Default

its coming together nicely.

is your electrical bay going to be forward of the drive axles? what about house batteries?
__________________
Don R.
'04 Haulmark (M42386) 42', 2 slide, 10kw - Pictures
'04 F350 CrewCab Longbed 4x4, 50g aux tank & gear vendors dbl over
bushpilot is offline   Reply With Quote
Old 11-27-2016, 07:47 PM   #15
Junior Member
 
Hooter Shaker's Avatar
 
Join Date: Nov 2011
Location: East Texas
Posts: 20
Default

This picture is the hydraulic pump and control valves for slides and leveling jacks. The empty compartment is for diesel generator. I can operate slides and jacks from here or from inside. storage tray over hydraulic pump is for the 50 amp power cord. The yellow powder all over everything is from the fire extinguisher had a little fire the other day when jumper cables shorted while starting the generator.
Attached Thumbnails
20161127_104817.jpg  
Hooter Shaker is offline   Reply With Quote
Old 11-27-2016, 08:03 PM   #16
Junior Member
 
Hooter Shaker's Avatar
 
Join Date: Nov 2011
Location: East Texas
Posts: 20
Default

Ac breaker box, hot water heater, 12 volt water pump, and propane bottles are on right side of truck in compartment behind the door. Front compartment is for storage and a grill. Batteries for the living quarters are located in truck step on passenger side of truck, drivers side step has batteries for truck. I have a disconnect switch between both sets of batteries so I can charge, start , or run off of both sets of batteries if needed.
Attached Thumbnails
20161127_104916.jpg   20161127_104959.jpg  
Hooter Shaker is offline   Reply With Quote
Old 11-27-2016, 08:21 PM   #17
Senior Member
 
bushpilot's Avatar
 
Join Date: Jul 2011
Location: Tomball
Posts: 1,414
Default

I like that you've tapered the rear undercarriage of the coach - i recently got into a situation and the rear dragged the rear corner a little.

any particular reason why you went w/ a gas only water heater?

I've made good use of our dual gas/electric water heater - sometimes I'm in a situation where i don't have enough AC Current to support the water heater (and everything else) - and at the same time when I'm in a park w/ 30 or 50A then i don't have to consume my ($) propane for the water heater.

I also us the electric (water) heater element to heat water (when I'm in storage) before we head out (the day before etc).
__________________
Don R.
'04 Haulmark (M42386) 42', 2 slide, 10kw - Pictures
'04 F350 CrewCab Longbed 4x4, 50g aux tank & gear vendors dbl over
bushpilot is offline   Reply With Quote
Old 11-28-2016, 10:16 PM   #18
Junior Member
 
Hooter Shaker's Avatar
 
Join Date: Nov 2011
Location: East Texas
Posts: 20
Default

More Pictures of the build.
Attached Thumbnails
20160730_164847.jpg   20150514_165605.jpg   20161026_165606.jpg  
Hooter Shaker is offline   Reply With Quote
Old 12-01-2016, 09:05 PM   #19
Junior Member
 
Hooter Shaker's Avatar
 
Join Date: Nov 2011
Location: East Texas
Posts: 20
Default

Here is a before and after of floor. We cleaned and put 9 coats of clear floor sealer on the hardwood floor that was in trailer.
Attached Thumbnails
20160726_082346.jpg   20160724_095302.jpg  
Hooter Shaker is offline   Reply With Quote
Old 12-01-2016, 09:13 PM   #20
Senior Member
 
bushpilot's Avatar
 
Join Date: Jul 2011
Location: Tomball
Posts: 1,414
Default

NICE!

HS - where in E. Tx are you? Far from Tomball?
__________________

__________________
Don R.
'04 Haulmark (M42386) 42', 2 slide, 10kw - Pictures
'04 F350 CrewCab Longbed 4x4, 50g aux tank & gear vendors dbl over
bushpilot is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 05:07 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×