Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×


Join Truck Conversion Today
Reply
 
LinkBack Thread Tools Search this Thread Display Modes
 
Old 11-12-2012, 04:30 PM   #1
Junior Member
 
Join Date: Nov 2012
Posts: 3
Exclamation Looking for info on a slide out for my conversion

Hello I'm new to the site my name is Chris and I'm starting a build on a 1984 Peterbilt 359 long nose. Were building a 24 foot box and would like to install a slide into. Were just not sure how to go about it meaning if we should buy a kit or find a old rv in a junk yard and remove one from it. I have no idea were to start with that as far as the box were building out of 2x2 square tube 1/8 wall and roof bows out of 2x3 tube 1/8 wall. The floor is built out of 3inch channel and 4x2 3/8 wall sill rails. The box is very strong and starting to cut windows and door in but relly want to put a slide out in. Anyone have any ideas thanks chris
Attached Thumbnails
DSC00161.jpg   DSC00162.jpg   DSC00139.jpg  
__________________

Peterbilt359 is offline   Reply With Quote
Old 11-12-2012, 05:40 PM   #2
Senior Member
 
#90-GTSC's Avatar
 
Join Date: Nov 2010
Location: Grafton
Posts: 285
Default

This should be a great looking truck when you're done. Are you going to twin chrome stacks on it?
__________________

__________________
Started looking for 379 Peterbilt TC, 24' to 30' box, bumper pull--but ended up w/1999 Liberty Coach conversion of 45' Prevost XLV bus. 1,000sf heated/AC'd race shop w/dump station, 50amp shore pwr where bus parks, 3 NASCAR/ARCA race cars & 26' Bravo trailer.
#90-GTSC is offline   Reply With Quote
Old 11-12-2012, 05:49 PM   #3
Junior Member
 
Join Date: Nov 2012
Posts: 3
Default

Oh yea were going to put some 6inch stacks on her and dress her up in lots of chrome
Peterbilt359 is offline   Reply With Quote
Old 11-13-2012, 10:45 AM   #4
Senior Member
 
Kenn's Avatar
 
Join Date: Sep 2010
Location: Willamina Or
Posts: 277
Default 359

Welcome to the site. Looking forward to your build. Do you have a floor plan? Are you talking about one or two slides? I would think using an old slide would save money but be harder to work with. Keep the pictures coming. Nice to see another 359. What engine and transmission do you have?
Kenn is offline   Reply With Quote
Old 11-13-2012, 10:52 AM   #5
Senior Member
 
Bob86ZZ4's Avatar
 
Join Date: Feb 2009
Location: St. Paul, MN
Posts: 1,819
Default

My t/c has a Liftco slide in it. Welcome to Liftco, Inc. - Liftco - RV Beds, Flush Floor Systems, RV Folding Beds, Glide Outs, Manual Roller Slideouts, RV Beds, Stabilizing Systems, and more! They are a top notch slide builder. Might want to look around on their site and then call them and talk to an engineer or sales person. Wasn't there a guy around here building a drop deck box trailer that was putting in his own slides?
__________________
'03 Freightliner FL112, 295" wheel base, with '03 United Specialties 26' living quarters, single screw, Cat C12 430 h/p 1650 torque, Eaton 10speed , 3.42 rear axle ratio
Bob86ZZ4 is offline   Reply With Quote
Old 11-13-2012, 11:11 AM   #6
Senior Member
 
Bob86ZZ4's Avatar
 
Join Date: Feb 2009
Location: St. Paul, MN
Posts: 1,819
Default

I think it was 377pete. But I can't find any photo albums of his.
__________________
'03 Freightliner FL112, 295" wheel base, with '03 United Specialties 26' living quarters, single screw, Cat C12 430 h/p 1650 torque, Eaton 10speed , 3.42 rear axle ratio
Bob86ZZ4 is offline   Reply With Quote
Old 11-13-2012, 11:15 AM   #7
Senior Member
 
Bob86ZZ4's Avatar
 
Join Date: Feb 2009
Location: St. Paul, MN
Posts: 1,819
Default

Here it is: http://www.truckconversion.net/forum...ll-slide-4188/

Looks like a bunch of the pictures are gone due to bad links. Darn.
__________________
'03 Freightliner FL112, 295" wheel base, with '03 United Specialties 26' living quarters, single screw, Cat C12 430 h/p 1650 torque, Eaton 10speed , 3.42 rear axle ratio
Bob86ZZ4 is offline   Reply With Quote
Old 11-14-2012, 05:46 PM   #8
Junior Member
 
Join Date: Nov 2012
Posts: 3
Default

Quote:
Originally Posted by Kenn View Post
Welcome to the site. Looking forward to your build. Do you have a floor plan? Are you talking about one or two slides? I would think using an old slide would save money but be harder to work with. Keep the pictures coming. Nice to see another 359. What engine and transmission do you have?
Thanks Ken
I'm waiting for the wife to change it again but as of right know we have one and locked in. I'm thinking probly not going to go with slide. We have room and its just the 2 of us. I have 25 feet of space and I'm thinking that will work fine. Were planing on putting in some big windows and make it open looking. The truck has 3406 cat 425hp with a 15 speed eaton tranny motor is fresh as well as tranny all rebuilt she gets up and goes. We have it turned up a little. Need to find some leveling jacks and finish out the basement on the box and we will have must of it all framed out ready for sheathing. thanks
Peterbilt359 is offline   Reply With Quote
Old 11-15-2012, 09:20 AM   #9
Junior Member
 
Join Date: Nov 2012
Posts: 1
Default

Check out Steve's Eagle bus build. Great homemade slide pics.
Ourbusconversion.blogspot.com

Fred
__________________

Pete359EX is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 03:48 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×