Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×


Join Truck Conversion Today
Reply
 
LinkBack Thread Tools Search this Thread Display Modes
 
Old 05-14-2012, 09:51 AM   #1
Senior Member
 
bushpilot's Avatar
 
Join Date: Jul 2011
Location: Tomball
Posts: 1,414
Default Tank Draw Issue/Question

Last night (running from Savannah to Houston) - i decided it was safe to run my tanks to the Texas Line (825 miles), even if i was only getting 8mpg (which ive never seen), I'd have plenty of range (2 x 60g tanks).

Feeling comfortable w/ our coach now (over 12k miles since last year).

Interestingly enough one tank (driver side) took close to 55 gallons, while the passenger side tank barely took 36 gallons (of 60).

the generator ran about 2 hours (1gph maximum, and the generator was NOT loaded).

MY QUESTION:

what happens if i were to run ONE tank Dry....would i be sucking air, will the truck DIE ?
__________________

__________________
Don R.
'04 Haulmark (M42386) 42', 2 slide, 10kw - Pictures
'04 F350 CrewCab Longbed 4x4, 50g aux tank & gear vendors dbl over
bushpilot is offline   Reply With Quote
Old 05-14-2012, 10:24 AM   #2
Senior Member
 
mmmc101's Avatar
 
Join Date: Feb 2009
Location: Choctaw,Okla
Posts: 174
Default

If the tank the truck engine is pulling fuel from runs dry, yes it will die. "Usually" the truck will be pulling out of the passenger side tank (low side of the road). The engine return line "should" be in the tank that it is pulling from. The same goes for the generator. If the return lines are plumbed to the right side and the engine/generator are pulling frome the left tank,you could get the situation you described or the line running between the tanks (equalizer line) is either to small or has some blockage. You really don't want to run it out of fuel as they can sometimes be a real pain to get restarted. MMM
__________________

mmmc101 is offline   Reply With Quote
Old 05-14-2012, 10:59 AM   #3
Senior Member
 
bushpilot's Avatar
 
Join Date: Jul 2011
Location: Tomball
Posts: 1,414
Default

Quote:
Originally Posted by mmmc101 View Post
You really don't want to run it out of fuel as they can sometimes be a real pain to get restarted. MMM
UNDERSTOOD & Agreed !
i have / use 2 other diesels - one mechanical ('84 300cd), the other "electronic" ('04 f350 6.0L)
__________________
Don R.
'04 Haulmark (M42386) 42', 2 slide, 10kw - Pictures
'04 F350 CrewCab Longbed 4x4, 50g aux tank & gear vendors dbl over
bushpilot is offline   Reply With Quote
Old 05-14-2012, 07:58 PM   #4
Member
 
Join Date: Mar 2012
Posts: 70
Default

Quote:
Originally Posted by mmmc101 View Post
is either to small or has some blockage
Yes, tanks should readily equalize.

The other answer is to have a selector to run out of one or the other, gauges on both, and then manage the use.
Oscarvan is offline   Reply With Quote
Old 05-15-2012, 09:38 AM   #5
Senior Member
 
Bob86ZZ4's Avatar
 
Join Date: Feb 2009
Location: St. Paul, MN
Posts: 1,819
Default

Don't the tanks always equalize when the engine is running? I thought that was how they work anyhow. I'm pretty sure my tanks keep about the same level judging by when I'm filling up anyhow. I don't think there is a crossover line at the low point on my tanks though. I think there is some way they circulate the fuel between the two to keep them equal.
__________________
'03 Freightliner FL112, 295" wheel base, with '03 United Specialties 26' living quarters, single screw, Cat C12 430 h/p 1650 torque, Eaton 10speed , 3.42 rear axle ratio
Bob86ZZ4 is offline   Reply With Quote
Old 05-17-2012, 01:44 PM   #6
Senior Member
 
Join Date: May 2011
Posts: 120
Default

My FLD 120 has at least a 1" line between tanks. They should equalized pretty fast.
__________________
AndyG
1989 FLD120 with 2000 NRC conversion
andyg is offline   Reply With Quote
Old 05-17-2012, 07:32 PM   #7
Senior Member
 
Join Date: Aug 2009
Location: Rockford
Posts: 490
Default

newer trucks have a suction and return line through both tanks about a 1/4 way up from bottom of tanks. a pickup tube goes down inside tank to about 1" off bottom. returning fuel goes through a valve with a ball in it. ball rolls back and forth depending on which return line has the most pressure. about like blowing through a straw. if ball sticks or freezes it will return all the fuel to one tank. that tank will over flow and other will run out of fuel killing engine. so your generator could lower that tank but when you start driving it should equalize again. if one tank is mounted higher it can cause a problem also.
__________________

volvoman is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 05:06 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×