Truck Conversion & Toterhome Community

Truck Conversion & Toterhome Community (https://www.truckconversion.net/forums/)
-   Truck Conversion General Discussions (https://www.truckconversion.net/forums/f104/)
-   -   Electric brake controller on a '03 Columbia? (https://www.truckconversion.net/forums/f104/electric-brake-controller-03-columbia-7704/)

neetchracer 06-19-2017 09:03 AM

Electric brake controller on a '03 Columbia?
 
How are people wiring these in? Thanks.

ChiefMechanicMark 06-19-2017 06:39 PM

I have wired standard electric brake controllers in air brake trucks by using the air pressure switch for the brake lights as the controller input. The other wires were battery power, ignition power and a ground. The newer controllers are using inertia switches inside for the brake power after initial setup. If the trailer brakes are not aggressive enough after initial set up you can adjust the controller as needed. On several of the vehicles I installed the electric controllers on, they were going to continue hauling air brake trailers and had no issues switching between trailers and not interfering with any systems. I believe the cost was around $80 for a good quality controller.


All times are GMT -5. The time now is 08:35 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.