Truck Conversion & Toterhome Community

Truck Conversion & Toterhome Community (https://www.truckconversion.net/forums/)
-   Truck Conversion General Discussions (https://www.truckconversion.net/forums/f104/)
-   -   Cat C7 on Propane (https://www.truckconversion.net/forums/f104/cat-c7-propane-6264/)

dstockdale 08-27-2012 01:24 PM

Cat C7 on Propane
 
Anyone have any data or sources for a conversion. ?
TNX
Don S.

blizzardND 08-27-2012 09:36 PM

look at Schawns Ice cream trucks, most are propane, not sure what the run for engines, if they are diesel, than the 3126 (C7) might be what GM had in most mdt's

-blizz

hot rod 08-28-2012 09:34 PM

All propane powered engines are based on gasoline engines not diesels, with only the fuel system being replaced, and otherwise stock. Propane needs to be fired by a spark plug and will not ignite strictly from compression like diesel fuel.

You are thinking of companies advertising propane injection for diesel engines, but that is just a power adder to the otherwise stock (or modified) diesel engine. Diesel is still the primary fuel source. In this case the ignition of the diesel fuel in turn ignites the propane for added power. The propane system is only activated for short periods of time to add power to climb a grade for example. With the big flurry of activity in diesel performance the last few years, the big players like Bully Dog and others have come out with propane injection systems like it is a new idea. But it has been around for 50 years or more, way back from the days when badly underpowered semis labored up grades at ridiculously slow speeds. Back then it was simply a tank and a hose and a valve you opened to let vapor propane into the airstream into the engine for a power boost. Simple easy safe (for the engine) horsepower. If fell by the wayside when the trucks started coming with enough power on their own, and has made a comeback with the diesel performance craze in pickup trucks.

Today's systems are all electronic or computer controlled, and more consistent and reliable than the old days. Still an economical way to add easy and reliable horsepower just when you need it. Usually on the order of an extra 50-75 horsepower at the touch of a button. It would be analogous to a Nitrous Oxide system in function, while different on the technical side. The only trick is mounting a proper tank, which is basically the same type vapor withdrawal tank you would use on an RV, as the fuel consumption is very small compared to a liquid withdrawal system like you would use for primary engine fuel.

I have one of those Schwan's trucks, a GMC 6500 with an 8.1L engine running full time on propane. Very happy so far, and in the middle of my conversion project. I was in the propane business for 15 years or so and would be glad to answer any questions.

thortheswede 09-25-2012 12:51 PM

Hot Rod,
How hard would it be to install one of the propane boost systems on a cat 3126 running 300 h.p.? I collect antique woodworking machines and when I am fully loaded might have some difficulty on grades. Any idea of the cost involved also?
Thanks, Robert

hot rod 09-25-2012 02:04 PM

I found these online:

Propane Injection Systems fuel savings in Diesel, Gasoline Turbocharged Engine Trucks, water vapor air fuel system separators
that one has some nice article, and they seem to be using their system full time to introduce a small amount of propane into the engine to increase combustion efficiency for reduced emissions and increased mileage. that one is new to me.

https://www.aera.org/ep/downloads/ep9/EPQ110_16-18.pdf
that one shows mileage comparisons on big trucks, in particular the cat 3126 they tested went from 8mpg to 10mpg, pretty impressive difference.

also:
ATS Torque Pro 2000 Propane System

good luck!


All times are GMT -5. The time now is 04:30 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.