Rain due so no more painting or sanding.
Swung to the back end to work on the rear door seals. Factory setup was 1/8" metal strips extending across the door gaps with foam weather stripping to block the dust and weather.
Ripped red cedar fence boards in half to cover the gaps. Routed the back out to make room for the steel hinge straps.
Caulking and paint will clean them up.
Right door will overlap the left.
Drop bolts will hold the doors shut from the inside. The existing cargo cams, levers, shaft, and cups weighed in at 30 lbs. That weight is gone and will add life to the right things.
