My rig had a 19" tube set up there. I built a frame out of square steel tubing:
And bolted it in place. I put a good size piece (actually two scraps I had around) of plywood underneath it since the base of that cabinet wasn't as heavy duty as I wanted. I also put another piece of finished wood across the bottom, under the cabinet, to make it all stronger. That piece will be visible in the last picture.
__________________
'03 Freightliner FL112, 295" wheel base, with '03 United Specialties 26' living quarters, single screw, Cat C12 430 h/p 1650 torque, Eaton 10speed , 3.42 rear axle ratio
|