View Single Post
Old 01-12-2012, 09:56 PM   #3
Dodger
Senior Member
 
Dodger's Avatar
 
Join Date: Sep 2009
Location: Fort Campbell
Posts: 118
Default

they are radius arm bushings for a diesel Ford van chassis. They are 3" diameter and 3 1/4" tall. The hole in the bushing is 15/16", and I am considering reaming it out to 1". The bolts are 3/4" diameter. I have found hardened steel sleeves that are 3/4" ID X 1" OD. If I went that route, there would be 1/4" of poly bushing between the sleeve and the frame outriggers. I am guessing that should be enough considering it is only a 1/16" less then what would be there if I did not drill them. Not to mention there is 10 of them supporting a 12' X 8' box. If I am headed in the wrong direction let me know!
__________________
1994 International 4700 powered by a DT360 (5 years and still working on it)
1990 Ford Bronco II
Dodger is offline   Reply With Quote