Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×


Join Truck Conversion Today
Reply
 
LinkBack Thread Tools Search this Thread Display Modes
 
Old 06-23-2011, 04:25 PM   #1
Junior Member
 
Join Date: Jun 2011
Location: NYC
Posts: 1
Default FL60 for personal use

I've put ~10k on my 2000 FL60 3126@250/FS6406A 6spd and spring suspension/hyd disc brakes over 2 years, mainly hauling a boat and running errands. I mounted a Bentz cab and a fiberglass utility body on it. It's great other than it's loud (tall gears) and it rides terrible, especially unloaded. I've taken 10 springs out of the rear and replaced with spacers, which helped quite a bit. I am planning on installing shocks, but was wondering if anyone had any thoughts on what to do to improve ride. I looked at Kelderman's 2 stage suspension as probably the best alternative, but was thinking an air suspension rear axle swap could be better.
__________________

intradev is offline   Reply With Quote
Old 06-23-2011, 07:10 PM   #2
Junior Member
 
Join Date: Jun 2011
Posts: 11
Default Good question.

Hi. I am a newbie here and planning to do a FL60 conversion myself. I can not help guide you but I am very interested in the answers I hope you get. In fact, I learned something in just reading your question: I did not know you could remove spring leaves. Thanks for your question.
__________________

sbphoto is offline   Reply With Quote
Old 06-23-2011, 10:02 PM   #3
Senior Member
 
Bob86ZZ4's Avatar
 
Join Date: Feb 2009
Location: St. Paul, MN
Posts: 1,819
Default

I think Doc Weaver has a FL60. Maybe he'll comment.
__________________
'03 Freightliner FL112, 295" wheel base, with '03 United Specialties 26' living quarters, single screw, Cat C12 430 h/p 1650 torque, Eaton 10speed , 3.42 rear axle ratio
Bob86ZZ4 is offline   Reply With Quote
Old 06-23-2011, 10:44 PM   #4
Senior Member
 
Doc Weaver's Avatar
 
Join Date: Jun 2008
Location: West Chester, Ohio
Posts: 483
Default

Here I am....
I removed leafs from my rear springs too. I made a huge difference. Shocks will not soften the ride, but will help the side to side sway.

I have looked into air ride. Hendrickson makes an air ride that I was quoted between 6k and 8k installed. That would make a huge difference.
Hendrickson Medium Duty - Bus - Motorhome Suspension Systems

noise can be minimized by some different things:
1. sound decoupler under the floor
2. sound absorber in the dash
3. padded leather cover over shifter
4. sound isolator on the doors

The Freightliners drive much better than the Internationals, but they are noisy. I looked hard to find a Cummins instead of a Cat, because the Cats are usually louder.
__________________
Doc Weaver '98 Freightliner FL60 pseudo toy hauler
Doc Weaver is offline   Reply With Quote
Old 06-24-2011, 11:59 AM   #5
Junior Member
 
Join Date: Jun 2011
Posts: 11
Default Learning!

Thanks, Doc.

Wow. This is great. I am so glad I found this site. You are covering topics I need to know about before I even get to the point of knowing what I need to know. Fantastic!

By the way, I looked at message threads about types of RV toilets/heads but still don't have a clear direction on this topic. Do you guys just use standard RV toilet + holding tank setups on your FL60s? There does not seem to be very much room below the floor level of the van type I am getting so I want as little hanging down where it could be damaged by rocks and curbs and bumps as possible. I briefly looked at information about one of the incinerating toilets but it seemed that these would use too much electricity (for the 120V electric kind) and I have not found a discussion about any which run on propane. Some of the composting types look interesting but there is an obvious split between those who like these and those who find them problematic. Any experience to help guide me would be much appreciated.

So many decisions...so much to learn...

I am trying to follow the pattern of measure twice; cut once. But I know there will be times when I need to measure three or four times. Not clear yet how many times I'll need to cut before getting things right. Sheesh.

Regards.
sbphoto is offline   Reply With Quote
Old 06-24-2011, 06:15 PM   #6
Junior Member
 
Join Date: Jun 2011
Posts: 11
Default Uh oh

Well, my truck deal just fell apart so I am back to square one. Guess I'll just lurk here until I get another truck for conversion. The only good news is I saved a huge drive to get the truck.
sbphoto is offline   Reply With Quote
Old 06-25-2011, 09:04 PM   #7
Senior Member
 
Doc Weaver's Avatar
 
Join Date: Jun 2008
Location: West Chester, Ohio
Posts: 483
Default

Don't give up on the incinolet yet. Even after the generator burnt through mine, I still love it. It beats black water any day. by the way, the incinolet is easy to repair and the manufacture is easy to work with.
__________________
Doc Weaver '98 Freightliner FL60 pseudo toy hauler
Doc Weaver is offline   Reply With Quote
Old 06-26-2011, 12:06 PM   #8
Junior Member
 
Join Date: Jun 2011
Posts: 11
Default incinolet

Doc,

Thanks for the info about Incinolet. I'll will be back to thinking about this stuff when I find another truck to convert.
__________________

sbphoto is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 08:50 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×