After nine months of not having time to work on my conversion I finally have some time to finish the insulation and interior walls. So hopefully this winter I will be able to heat it up a little and get some more work done.
I used Tuff R Polyisocyanurate 1 inch with aluminum face both sides and used PL 300 foam board adhesive. I left a 1/4inch gap around the edges. https://onfinite.com/libraries/655365/cd3.jpg https://onfinite.com/libraries/655366/f54.jpg Filled the 1/4inch gap with some fiber glass insulation. Then used 3M polystyrene foam spray adhesive to attach the 1 3/4 inch fiber glass insulation. https://onfinite.com/libraries/655367/8fd.jpg https://onfinite.com/libraries/655368/156.jpg Used PL polyurenthane adhesive to glue the 7/16inch OSB and screws every 6 - 8 inches. https://onfinite.com/libraries/655369/e34.jpg https://onfinite.com/libraries/655370/e67.jpg I am planning on having basement a/c and heat, the ducts and electric raceway will be run along the bottom left side. https://onfinite.com/libraries/655371/3fc.jpg https://onfinite.com/libraries/655372/9cb.jpg Their are some more photo's at: https://rosenbergwelding.tripod.com |
.....looks great!.....way overbuilt...just like I like it!...Nice to have some time off to work on your own projects isn't it!....best of luck and keep the pix coming....geofkaye
|
Looks really good......all that insulation will really pay big dividends in comfort, both in terms of temperature and noise. One thing that I see that I am curious about is the ceiling....is it curved??? Looks really trick. Do you have any pictures of the exterior?
Travis |
Yes it is curved, its a walk on roof and it will support a lot of weight.
https://onfinite.com/libraries/671489/f00.jpg More pictures at: https://www.geocities.com/rosenbergwelding/ and https://rosenbergwelding.tripod.com |
Super Trick!! I really like the truss idea for the roof...you should be able to park a car up there no problem!!
Travis |
All times are GMT -5. The time now is 01:26 AM. |
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.