Truck Conversion & Toterhome Community

Truck Conversion & Toterhome Community (https://www.truckconversion.net/forums/)
-   Building Your Own (https://www.truckconversion.net/forums/f97/)
-   -   Band Equipment Conversion (https://www.truckconversion.net/forums/f97/band-equipment-conversion-5165/)

JDorn 08-28-2006 08:14 AM

The local HS has obtained a furniture trailer to convert for hauling the band equipment. So far an engineer has designed a 'floating' floor system, allowing for an upper & lower storage area. By 'floating' I mean that the lower storage has walls made up of 2x4 studs and headers, with the upper floor resting on these walls. The assembly is only secured to the floor of the interior using metal l-brackets, and the upper floor has 1/2 inch clearance to the walls of the trailer on each side.

Next on the list is making cabinets for the upper floor and we've been discussing 2 options:
Mount the cabinets to the wall of the trailer, leaving some tolerance above the floor to allow for trailer movement due to wind...
Secure the cabinets directly on the upper floor, tying the left & right (passenger/driver side) cabinets together at the top

Any input, comments, or alternate approach would be welcome!!

Also, any special considerations we need to take into account when designing the cabinets to deal with trailer motion woudl be appreciated.

Regards,
Jon


All times are GMT -5. The time now is 11:37 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.