Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×


Join Truck Conversion Today
Reply
 
LinkBack Thread Tools Search this Thread Display Modes
 
Old 10-30-2016, 11:57 AM   #1
Member
 
Join Date: Oct 2016
Location: Thibodaux
Posts: 46
Default Toter purchase advice

I am ready to move from a 42ft American Tradition MH(400HP) to a toter. Been dragging around a 20ft stacker with race car, spares, tools, tires etc weighing ~14K for 10 years and lately pulling a 8K Hummer on a utility trailer to and from the Mtns for offroading. Wore out the 300K rated dif at 110K miles. I definitely need a toter but know little about them.
Questions: 1. approx HP needed
2. Twin vs single screw
3. Approx reasonable buying vs asking prices(MH markups are huge and I know nothing about toter and Mtr coache markups. Do not want to insult anyone with unreasonable offers and I hate that offer/counter offer game). Prices are all over the place and it seems that there is no easy way to know how many miles are on the donor chassis/engine.I will get killed on the trade in on my MH because of it's age and mileage so at the risk of being tacky, approx $ am I looking at to get into a used toter? Will 90 to 130K get me into something reasonable for what I want to do?
Any advice would be greatly appreciated and I value comments from forum members who have been there and done that and have no reason to BS.
Any advise would be greatly appreciated.
__________________

ItalGerBrit is offline   Reply With Quote
Old 10-31-2016, 06:11 AM   #2
Senior Member
 
Join Date: Jun 2012
Location: Spotsylvania
Posts: 376
Default

Welcome to the forum. I don't know much about heavy towing, but I can tell you that I think you've come to the right place for your question. The participants here were a great help with my purchase.

After spending last summer/fall shopping for and purchasing my truck conversion, I can say that I think your price range is reasonable, so long as your expectations for newness aren't too high. You can get the power, but maybe not the glitz at that price point. Best of luck!
__________________

__________________
2006 Renegade/Freightliner Coronado 43', Detroit, twin screw, 12spd
2001 Ford Excursion PSD
2017 Ford F450
petrel is offline   Reply With Quote
Old 10-31-2016, 08:32 AM   #3
Member
 
Join Date: Oct 2016
Location: Thibodaux
Posts: 46
Default

Quote:
Originally Posted by petrel View Post
Welcome to the forum. I don't know much about heavy towing, but I can tell you that I think you've come to the right place for your question. The participants here were a great help with my purchase.

After spending last summer/fall shopping for and purchasing my truck conversion, I can say that I think your price range is reasonable, so long as your expectations for newness aren't too high. You can get the power, but maybe not the glitz at that price point. Best of luck!
Thanks for the quick reply Petrel.

Understand about the Glitz. Have that with the MH and that can be added with wall tile and mirrors very cheaply but I need a "manly" rig now and not as long as the MH. Less length and more grunt. My wife no longer travels with me which is good. Much quieter and less hassle!
ItalGerBrit is offline   Reply With Quote
Old 10-31-2016, 05:34 PM   #4
Senior Member
 
bushpilot's Avatar
 
Join Date: Jul 2011
Location: Tomball
Posts: 1,414
Default

Quote:
Originally Posted by ItalGerBrit View Post
I am ready to move from a 42ft American Tradition MH(400HP) to a toter. Been dragging around a 20ft stacker with race car, spares, tools, tires etc weighing ~14K for 10 years and lately pulling a 8K Hummer on a utility trailer to and from the Mtns for offroading. Wore out the 300K rated dif at 110K miles. I definitely need a toter but know little about them.

QUOTE=ItalGerBrit;46261]
Questions: 1. approx HP needed
Man i almost bought an American, super nice coaches.

As for Horsepower.....get as much as you can afford...then borrow for what you need

Our MBE 4000 / DD13, 450HP (1650 tq) should be plenty. I know plenty who tow 30+ foot stackers with our engine/trans.

Our (single screw, 3.21 rear) and its 450hp (12.8L intercooler turbo) has no problem pulling a 11k lb trailer (topping us out around 43k lbs).

There are models available w/ up to 600+ horse (north of 1800 ft lbs).

I think you'll find w/ our smart shift virtual automatics (dry clutch, not a torque converter) the 12-13 forward (and 2 reverse) gears will serve you just fine....i can out run/out pull just about any pusher on any mountain grade w/ any load.

Quote:
Originally Posted by ItalGerBrit View Post

2. Twin vs single screw
the nice thing about our twin screws is the on demand lockers (independent for each axle) and the ability to lock the axles together (ala 4 wheel drive or 8 tire drive).

the down side is cost of tires, and turning radius (since we can't life either drive axle).

you'd be hard pressed to exceed the GCWR capacity of a twin screw, but i think you may suffer some mpg too.

I have seen 10mpg towing 11k lbs (22', 2 axle car trailer).


Quote:
Originally Posted by ItalGerBrit View Post
3. Approx reasonable buying vs asking prices(MH markups are huge and I know nothing about toter and Mtr coache markups. Do not want to insult anyone with unreasonable offers and I hate that offer/counter offer game). Prices are all over the place and it seems that there is no easy way to know how many miles are on the donor chassis/engine.I will get killed on the trade in on my MH because of it's age and mileage so at the risk of being tacky, approx $ am I looking at to get into a used toter? Will 90 to 130K get me into something reasonable for what I want to do?
its a buyers market.

I was close to the low end of your range 5 yrs ago when we bought our coach.
you should be able to buy a toter for the low end of your range (if not even lower). I would expect (depending on the condition) that you could buy a full on coach (42' or more) for the range you mention.

__________________
Don R.
'04 Haulmark (M42386) 42', 2 slide, 10kw - Pictures
'04 F350 CrewCab Longbed 4x4, 50g aux tank & gear vendors dbl over
bushpilot is offline   Reply With Quote
Old 11-01-2016, 08:35 AM   #5
Senior Member
 
solo318's Avatar
 
Join Date: Jul 2015
Location: Central Florida
Posts: 127
Default

one consideration that no one has mentioned yet is legality. Some states are requiring "toter homes" ie fifth wheel OR gooseneck to be registered commercial only. While "truck conversions" that use a bumper hitch to be registered as RVs. One of my customers bought his toter and assumed he could get an rv tag. He found out that the 3 states he owns homes in would only tag it commercially. I actually played heck getting mine re titled in Florida as an RV.
solo318 is offline   Reply With Quote
Old 11-01-2016, 09:50 AM   #6
Member
 
Join Date: Oct 2016
Location: Thibodaux
Posts: 46
Default Toter

Thanks guys. Just the type advice I was looking for and thanks for the pic.

I will not be pulling a gooseneck or 5th wheel and only need a hitch for my two different trailers so no problem with license. Fairly sure that I do not need more than 32 foot box room wise and would like a shorter total length for easier
maneuverability. I have been busted in Texas for being over total length with my MH/trailer so the shorter length toter will help in that regard as well.

So it looks as though you guys think that a twin screw might be overkill and added expense and maintenance for what I will be doing? I have always done the complete service and most of the repairs on my MH myself and have heard that these things are easier to work on. Any experience with that?

Any idea about the typical markup on used toters/Mtr Coaches? Looks like best site for shopping is RacingJunk?

Feel free to keep the advice coming. I love it!
ItalGerBrit is offline   Reply With Quote
Old 11-01-2016, 02:45 PM   #7
Senior Member
 
bushpilot's Avatar
 
Join Date: Jul 2011
Location: Tomball
Posts: 1,414
Default

I assumed that were talking about buying (an already titled "true" toter (aka 5er/gn hitch), not converting a tractor to a toter.

In my mind a (real) TOTER has living quarters....like THIS one (forsale in Arizona) LINK
__________________
Don R.
'04 Haulmark (M42386) 42', 2 slide, 10kw - Pictures
'04 F350 CrewCab Longbed 4x4, 50g aux tank & gear vendors dbl over
bushpilot is offline   Reply With Quote
Old 11-01-2016, 03:06 PM   #8
Senior Member
 
Join Date: Jun 2012
Location: Spotsylvania
Posts: 376
Default

That's what I had in mind as a toter too.
__________________
2006 Renegade/Freightliner Coronado 43', Detroit, twin screw, 12spd
2001 Ford Excursion PSD
2017 Ford F450
petrel is offline   Reply With Quote
Old 11-01-2016, 03:17 PM   #9
Senior Member
 
solo318's Avatar
 
Join Date: Jul 2015
Location: Central Florida
Posts: 127
Default

A lot of the "toters" are never retitled. They seem to leave that up to the new owners. Many are sold into states that don't require a cdl for non commercial and are still titled as an HDT. My customer had a toter that he purchased brand new. Since he bought it with a Montana LLC, they never retitled it as a MH. So when he went to register it privately he found out that he could not, and Florida demanded he get a CDL and carry commercial insurance. He ended up ordering a new truck conversion with a tag trailer. BTW it was a big name toter but shall remain un named.
solo318 is offline   Reply With Quote
Old 11-01-2016, 03:19 PM   #10
Senior Member
 
solo318's Avatar
 
Join Date: Jul 2015
Location: Central Florida
Posts: 127
Default

More and more states are going after the "pro" teams that are skirting the law by using toters instead of properly getting DOT numbers and paying fuel taxes.
solo318 is offline   Reply With Quote
Old 11-01-2016, 03:23 PM   #11
Member
 
Join Date: Oct 2016
Location: Thibodaux
Posts: 46
Default Toter

I figured that is what you guys understood as a toter and I still do not know what to call a tractor with a big box on the back with a 40K hitch. I have found several that will work in the $90 to $150 K asking price range. Cannot figure out what dictates the difference in price because of miles on the chasis/mtr not being disclosed, year designations meaning the year that the it was stretched and box put on, etc. Does seem like miles on donor truck almost do not count one way or the other.
Next to nothing is available down South( in am in S Louisiana). Most are on L or R coast or in Midwest.
Thanks again for the guidance.
ItalGerBrit is offline   Reply With Quote
Old 11-01-2016, 03:28 PM   #12
Senior Member
 
bushpilot's Avatar
 
Join Date: Jul 2011
Location: Tomball
Posts: 1,414
Default

Quote:
Originally Posted by ItalGerBrit View Post
Thanks guys. Just the type advice I was looking for and thanks for the pic.

I will not be pulling a gooseneck or 5th wheel and only need a hitch for my two different trailers so no problem with license. Fairly sure that I do not need more than 32 foot box room wise and would like a shorter total length for easier
maneuverability. I have been busted in Texas for being over total length with my MH/trailer so the shorter length toter will help in that regard as well.
since I'm in Texas (NW Houston to be precise) - I'm curious to hear more about when / where & how you were busted for over length.

I'm 42 feet tip to tail plus hitch.
Add in a tow-bar & jeep wrangler I'm nearly 62 feet.
If I'm towing the 22 foot trailer I'm over 65 feet.

According to this chart I'm over length even with the jeep in 18 states
and in another 18 states (32 total) I'm over length with the 22 foot trailer.

Only 8 states permit anything over 65 feet.




Quote:
Originally Posted by ItalGerBrit View Post
So it looks as though you guys think that a twin screw might be overkill and added expense and maintenance for what I will be doing? I have always done the complete service and most of the repairs on my MH myself and have heard that these things are easier to work on. Any experience with that?
If i were pulling a heavy load (aka stacker), I'd want the added capacity of the 2nd axle...just for the margin of safety and the extra set of brakes.

Even at my (seemingly light weight) 36k lbs, i wish i had some extra braking capability.

If you can afford the 4 extra tires every 6 or so years i'd go for it....figure 500 bucks a tire thats only 333 dollars cost (per year) over a single axle....i burn more fuel than that per quarter back and forth to virginia etc.

another benefit - the extra set of tires means youre not completely dead where you are if you ever have a flat.

Maintenance is pretty low on our coaches - given that these are purpose built chassis that are designed to run 1M miles w/ only an in-frame needed around 750k miles....yeah stuff breaks...but these trucks can be serviced almost anywhere (including truck stops).

I do what i can on our coach - but so far thats been limited to (43 quart) oil / filter changes & fuel filters. I had a rear spring (bushing) go bad & to have the axle dropped & all the spring bushings replaced AND a full alignment done it only cost me 1000 bucks (i don't have the equipment to drop a class 8 tractor trailer drive axle).

We have close to 150k miles on our brake (shoes) and they might be approaching 50% wear....i think we (campers) do a lot more stop & go than most class 8 tractors.

our trucks are designed to haul 80k lbs.... and i rarely see my trans temp come off the peg at 125* (f) - even at 43k lbs....im not even beginning to stress our coach.

MOST pusher coaches (with their tiny 8-ish liter engines) leave the factory at or near their maximum GVWR...thats why a lot of the manufactures are using wider tires on the new coaches now....theyre maxed out from day 1!
__________________
Don R.
'04 Haulmark (M42386) 42', 2 slide, 10kw - Pictures
'04 F350 CrewCab Longbed 4x4, 50g aux tank & gear vendors dbl over
bushpilot is offline   Reply With Quote
Old 11-01-2016, 03:31 PM   #13
Member
 
Join Date: Oct 2016
Location: Thibodaux
Posts: 46
Default permits

When I was busted in Texas, the cop stopped us(a buddy got busted as well) and questioned us initially about being pro racers and did not believe us until we showed him our Porsche Club racer cars with the club racing decals. So then he drug out the tape and we were both over the 65 ft overall length and we did "NOT" have temp permits.
ItalGerBrit is offline   Reply With Quote
Old 11-01-2016, 03:43 PM   #14
Senior Member
 
bushpilot's Avatar
 
Join Date: Jul 2011
Location: Tomball
Posts: 1,414
Default

Quote:
Originally Posted by ItalGerBrit View Post
I figured that is what you guys understood as a toter and I still do not know what to call a tractor with a big box on the back with a 40K hitch. I have found several that will work in the $90 to $150 K asking price range. Cannot figure out what dictates the difference in price because of miles on the chasis/mtr not being disclosed, year designations meaning the year that the it was stretched and box put on, etc. Does seem like miles on donor truck almost do not count one way or the other.
Next to nothing is available down South( in am in S Louisiana). Most are on L or R coast or in Midwest.
Thanks again for the guidance.
somewhere on this site is a list of dealers - i got our coach (from a private seller) in St. Louis (he was pulling a stacker, briefly, and was upgrading to a twin screw).

my seller had his unit consigned with Flying A Motorsports....i looked for a good 18 months til i found the configuration we were looking for.

I'd keep an eye on the dealers and eBay - i used to have a bot run on eBay for all the manufacture names "haulmark rv" "show hauler" "renegade" and "toter home" - many of the listings are at dealers.
__________________
Don R.
'04 Haulmark (M42386) 42', 2 slide, 10kw - Pictures
'04 F350 CrewCab Longbed 4x4, 50g aux tank & gear vendors dbl over
bushpilot is offline   Reply With Quote
Old 11-01-2016, 03:48 PM   #15
Senior Member
 
Join Date: Jun 2012
Location: Spotsylvania
Posts: 376
Default

When I started down this road, I just wanted a class-8 tractor with a big sleeper "singled" for towing heavy tag along stuff. Interestingly, the gentleman I spoke to (some shop in Canada recommended on another hdt forum) recommended against a singled out class-8 for tag along towing, because there would not be enough weight over the axle for optimal traction.

That is what started me looking at complete conversions. Unfortunately, once I got looking at conversions, I wanted a motor home! Even though I now have the power to tow three of my boats, it is too doggone long to tow it. So, I am thrilled with my motorhome, but I still have to tow the boat with my pickup
__________________
2006 Renegade/Freightliner Coronado 43', Detroit, twin screw, 12spd
2001 Ford Excursion PSD
2017 Ford F450
petrel is offline   Reply With Quote
Old 11-01-2016, 04:06 PM   #16
Member
 
Join Date: Oct 2016
Location: Thibodaux
Posts: 46
Default

When busted, we were in NW Texas on the direct route from Dallas to Denver in nowhere land. Damn your state is big! We were brought into a tiny town and hauled into court but luckily the Judge was out that day so the cop escorted us back to the county line and we headed on to the race track near Denver. My total length is 66 ft with the 20ft stacker.

Nice Jeep. Do you offroad it? Hummer advises against dingy towing H1s unless the drive shafts are pulled plus I am always hard whellin off road and occasionally bust stuff and kill the truck so need the trailer to drag it back it home to repair it. I carry spare drive shafts, half shafts, etc so what has broken lately? Steering box and radiator! Never the stuff you have on hand. Use the stacker for race and street cars.

The H1 Hummer on a heavy utility trailer is the "light" load I pull so I now know to get the twin screw based on your advice. Also think 500+hp might be wise as well. Looks like I am sorta cutting out a lot of possibilities which may narrow my choices?
ItalGerBrit is offline   Reply With Quote
Old 11-02-2016, 12:31 AM   #17
Senior Member
 
bushpilot's Avatar
 
Join Date: Jul 2011
Location: Tomball
Posts: 1,414
Default

Quote:
Originally Posted by ItalGerBrit View Post
When busted, we were in NW Texas on the direct route from Dallas to Denver in nowhere land. Damn your state is big! We were brought into a tiny town and hauled into court but luckily the Judge was out that day so the cop escorted us back to the county line and we headed on to the race track near Denver. My total length is 66 ft with the 20ft stacker.
YUP....more than 850 miles from lousiana to new mexico.
Any idea what the fine could have been?

Quote:
Originally Posted by ItalGerBrit View Post
Nice Jeep. Do you offroad it? Hummer advises against dingy towing H1s unless the drive shafts are pulled plus I am always hard whellin off road and occasionally bust stuff and kill the truck so need the trailer to drag it back it home to repair it. I carry spare drive shafts, half shafts, etc so what has broken lately? Steering box and radiator! Never the stuff you have on hand. Use the stacker for race and street cars.

The H1 Hummer on a heavy utility trailer is the "light" load I pull so I now know to get the twin screw based on your advice. Also think 500+hp might be wise as well. Looks like I am sorta cutting out a lot of possibilities which may narrow my choices?
Our ('12) Jeep Wrangler (sport) w/ soft top tips the scale around 4200 lbs - if it weren't for the rear view cameras we wouldn't even know it was back there.

Ours is mostly a "mall crawler" we've wheeled it several times (virginia, arizona & central texas). Ive boosted it 1.5 inches but am about to lift it 3 inches - I've been waiting to wear out the factory tires from towing it behind the coach.

Our Wrangler is a manual trans, but all Wranglers have a manual transfer case - so Mopar/Jeep says tow 'em in park (auto) or gear (manual) and put the transfer case in Neutral....mopar even makes a factory harness that uses weather tight connectors (plugs into the factory harness) and allows direct connection to the primary tow vehicle 7 pin connector for use of the factory (jeep) tail lights....no extra wiring or lights needed.
__________________
Don R.
'04 Haulmark (M42386) 42', 2 slide, 10kw - Pictures
'04 F350 CrewCab Longbed 4x4, 50g aux tank & gear vendors dbl over
bushpilot is offline   Reply With Quote
Old 11-02-2016, 03:26 PM   #18
Member
 
Join Date: May 2015
Location: Flagstaff
Posts: 49
Default

Check the front end and tire specs along with the actual front axle weight before you buy anything. Some of these coaches are heavy on the front. Renegade started to change over their specs a few years ago from 12K to 18K. We run 315 steer tires up front and a lot of the newer coaches do the same.

Like some of the guys said, good buys are out there you just have to be patient and keep looking. We have a Detroit Series 60, 13-speed manual, twin screw. I've had a few friends have troubles with their automatics but it seems like it's always electrical related issues.
DeepVee is offline   Reply With Quote
Old 11-02-2016, 03:50 PM   #19
Member
 
Join Date: Oct 2016
Location: Thibodaux
Posts: 46
Default

Quote:
Originally Posted by DeepVee View Post
Check the front end and tire specs along with the actual front axle weight before you buy anything. Some of these coaches are heavy on the front. Renegade started to change over their specs a few years ago from 12K to 18K. We run 315 steer tires up front and a lot of the newer coaches do the same.

Like some of the guys said, good buys are out there you just have to be patient and keep looking. We have a Detroit Series 60, 13-speed manual, twin screw. I've had a few friends have troubles with their automatics but it seems like it's always electrical related issues.
Not sure how I would identify the front heavy coachs as those specs are not typically listed and I would not know good from bad nor the appropriate questions to ask.

Is your 13spd manual totally manual or do you use the clutch at start up and then it is auto? I would not mind cranking a shifter as all my cars are manuals and I prefer manuals if given a choice. When I say I know almost nothing about the big trucks it is true. Whole new world to me but one I must learn because there is no turning back now.

Keep the comments coming. I am learning very quickly.
ItalGerBrit is offline   Reply With Quote
Old 11-02-2016, 04:08 PM   #20
Member
 
Join Date: May 2015
Location: Flagstaff
Posts: 49
Default

Quote:
Originally Posted by ItalGerBrit View Post
Not sure how I would identify the front heavy coachs as those specs are not typically listed and I would not know good from bad nor the appropriate questions to ask.

Is your 13spd manual totally manual or do you use the clutch at start up and then it is auto? I would not mind cranking a shifter as all my cars are manuals and I prefer manuals if given a choice. When I say I know almost nothing about the big trucks it is true. Whole new world to me but one I must learn because there is no turning back now.

Keep the comments coming. I am learning very quickly.
I'd just keep the front axle stuff in mind. We had 11R x 24.5 tires on the front of our truck when we bought it. They're a 7K tire but they were pretty squatty and the steering was really tough when stopped. I'd just consider what front tires are there and maybe take it across a scale if you can. Our local truck stop let me do ours for free with a verbal weight. They're probably not all like this so don't let me scare you. Also consider where the fuel tanks are and what the effects are when they're full. I true 18K set-up has big stuff, big steering rods, U-bolts, hubs, 9K wheels and sometimes dual steering (box on one side with a ram on the other side).

Yes, we have a manual and really only use the clutch to get going. It's a full manual though so we're shifting gears w/o the clutch after that or double clutching. It's fun and easy to drive once you figure it out and I'm still learning. Our's is an Eaton Road Ranger 13-speed and it's super versatile when rolling down the road.

Double frames is another item. I'm not convinced they all need double frames but some have them and some don't. The frames are nested one inside of another if they have it. Most of the coach builders stack some pretty big boxed frames between the coach box and the truck frame so I'm not really sure it necessary but having a double frame is not really a bad thing.
__________________

DeepVee is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 07:32 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×