Join Truck Conversion Today
Reply
 
LinkBack Thread Tools Display Modes
 
Old 09-30-2013, 05:38 PM   #1
Junior Member
 
Join Date: Jun 2012
Location: midwest
Posts: 28
Default Haulmark contact

Does anyone have a name at Haulmark they use for repairs or warranty work?
I need some things done and need to go back.
__________________

A.J. is offline   Reply With Quote
Old 10-01-2013, 02:23 PM   #2
Junior Member
 
Dogtales's Avatar
 
Join Date: Sep 2010
Posts: 28
Default

I don't have a specific name but you can contact their service department at 574-264-9661, extension 350.
Someone should be able to assist you at that number.
__________________

Dogtales is offline   Reply With Quote
Old 10-02-2013, 09:10 PM   #3
Senior Member
 
Join Date: Mar 2009
Location: Beloit
Posts: 119
Default

For our Haulmark stacker trailer I use: Matt in the trailer Parts: He has been very helpful for everything I have needed.
superbird03 is offline   Reply With Quote
Old 10-22-2013, 06:45 PM   #4
Junior Member
 
Join Date: Jun 2012
Location: midwest
Posts: 28
Default

Thanks for the replies.
Called over there and have to set up an appointment. Will do this week.
My problem is a rattle in the bulkhead behind the pass. seat.
It sounds to me as if one of the 2x2 tubing has broken a weld and is just rattling at the bottom. Sounds lower than higher.
The production mang. I think Steve? will go for a drive with me and then go from there.
A.J. is offline   Reply With Quote
Old 10-23-2013, 01:25 PM   #5
Junior Member
 
Dogtales's Avatar
 
Join Date: Sep 2010
Posts: 28
Default

Thanks for the update. I understand that Haulmark has really upgraded their operations in the past year or so.
Please let us know the end results with your concerns and how you were treated by the customer service department.
.....and safe travels.
Dogtales is offline   Reply With Quote
Old 10-23-2013, 03:31 PM   #6
Junior Member
 
Join Date: Jun 2012
Location: midwest
Posts: 28
Default

So far so good. Excellent communication with their customer service, prompt call returns.
Actually, as I'm typing just received a call to find out I have an appointment at 10 a.m. tomorrow for a look see.
Well see how it goes and what the issue is while we do a drive with a rep. so he can hear the noise and go from there.
So you guys know I have a 2007, 333MG, Freightliner 120 chassis, tandem axle. Very pleased with the unit from day one.
Will post up when I know more.
A.J. is offline   Reply With Quote
Old 10-29-2013, 12:03 PM   #7
Senior Member
 
Bob86ZZ4's Avatar
 
Join Date: Feb 2009
Location: St. Paul, MN
Posts: 1,750
Default

Curious to know what it was. I thought Hallmark used FRP construction on their boxes. That wouldn't be consistent with what you thought was making the noise, would it?
__________________
'03 Freightliner FL112, 295" wheel base, with '03 United Specialties 26' living quarters, single screw, Cat C12 430 h/p 1650 torque, Eaton 10speed , 3.42 rear axle ratio
Bob86ZZ4 is offline   Reply With Quote
Old 11-01-2013, 06:13 PM   #8
Senior Member
 
rjdhomes's Avatar
 
Join Date: Feb 2004
Location: Huntley, Illinois
Posts: 143
Default

Haulmark uses a welded aluminum frame with a thin frp or gelcoat panel bonded to the frame as the exterior skin
__________________
'18 Renegade 45'
Volvo Twin Screw, 500 hp I-Shift 12 Speed
30' Renegade Stacker Trailer
rjdhomes is offline   Reply With Quote
Old 11-02-2013, 09:58 PM   #9
Senior Member
 
Bob86ZZ4's Avatar
 
Join Date: Feb 2009
Location: St. Paul, MN
Posts: 1,750
Default

Then it doesn't sound like one of the tubes could come loose and rattle, does it? That must be how they build the walls. But how do they attach the walls? Is the floor framing aluminum too?
__________________
'03 Freightliner FL112, 295" wheel base, with '03 United Specialties 26' living quarters, single screw, Cat C12 430 h/p 1650 torque, Eaton 10speed , 3.42 rear axle ratio
Bob86ZZ4 is offline   Reply With Quote
Old 11-03-2013, 02:39 PM   #10
Junior Member
 
Join Date: Jun 2012
Location: midwest
Posts: 28
Default

Well, I am pleased to say it wasn't anything wrong with the build structure.
It was very simple actually, the stainless trim that covers the corner on the passengers
outside front of the box was vibrating against the wall at speeds in excess of 40 mph faster equals louder (no pun intended ;-).
The guys at Haulmark opened up the interior bulkhead and went for a ride.
Listening closely they discovered even though the noise is emitting from the bulkhead its not originating in the bulkhead.
Sitting in the pass. seat, rolled down the window and could hear it even more, looked in the pass. mirror and could actually see it moving.

A piece of cardboard wedged in and wala no more noise.
Once the unit is in warmer weather I will apply some 3m double sided tape ( roll provided by Haulmark) and solve the issue on both sides.
BTW, from the first time I called Haulmark the calls were returned promptly and the service was professional.
Once I got to the shop I was treated with respect.
The guys in the shop putting things together were happy to be there.
The shop is clean and well kept.
Top notch operation.
Attached Thumbnails
20131024_175043.jpg  
__________________

A.J. is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


» Virginia State Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -5. The time now is 09:04 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.