Truck Conversion & Toterhome Community

Truck Conversion & Toterhome Community (https://www.truckconversion.net/forums/)
-   Hi, I am.... (https://www.truckconversion.net/forums/f116/)
-   -   Geoff in Australia here (https://www.truckconversion.net/forums/f116/geoff-australia-here-7389/)

roKWiz 03-28-2015 11:31 PM

Geoff in Australia here
 
3 Attachment(s)
I've been following some of the fantastic builds here which I'm learning a great deal from and thought I would introduce myself.
As a craftsman who spends a lot of time on the road along the Eastcoast of Oz I have built a couple of smaller box truck conversions over the years to satisfy my needs while away.
A bigger project I'm wanting to do soon, is old K125 cabover Kenworth from 1976.
I've been restoring her since 2010 and use her hauling local granite I use for my work. + my occasional yacht move.
A future stage of development I plan to use her for will be pulling a double drop furniture pan conversion I'm currently looking out for. The pan I want to convert would be 40ft long bogie, divided in half 20ft living, 20ft smaller truck and palleted stone (5 pallets) storage.
What I would like to do is change the KW over to single drive on Pete low leaf or air leaf suspension, freeing up chassis space for a 6ft drom/living box behind the cab.
Being into old school trucks is great advertising for my business and I do get a lot of work off her and my other smaller converted ones.
Thanks for listening, any thoughts

here are a some pics. K125CR. VT903 Cummins 400hp. RTO915. 44000lb
rockwells on TBB.

https://stonemasoncarver.com/sitebuil...on-461x328.jpg

https://stonemasoncarver.com/sitebuil...es-487x382.jpg

Here's the other smaller truck conversions I use. Both built up from C/Chassis
Geoff

Bob86ZZ4 03-29-2015 04:10 PM

Welcome to Truckconversion.net! That's a cool old Kenworth there. What about keeping the tandems on it and stretching the frame. Then put a larger than 6' living quarters on and pull your trailer? I'm thinking 6' doesn't give you much space.

38Chevy454 03-30-2015 02:56 PM

Welcome from another newbie. Nice old cabover KW you have there. I agree with Bob's suggestion, a stretch to get the extra living quarters space and keep the twin screw rear. You get the extra braking of the dual rears, and longer wheelbase would ride better as well.

roKWiz 03-30-2015 07:55 PM

Thanks for the welcome guys, yes the ol Kenworth is a classic.
Bare with me on my reasoning here,
not really wanting to stretch the frame as I need manouverability (spelling) for hauling my boat around marina slipways, also getting around stone yards and quarries I frequent. The trailer used, being a 30ft single axle old style lowboy.
I was thinking of building something slightly bigger and similar to the 60in sleeper I built on my little gooseneck truck. Its interior has toilet, storage compartment, fold down bed, kitchenette, couch and table. Half the trailer would have the living quarters onboard anyway with the rear half carrying my smaller gooseneck truck shown above.
In Australia, going single drive would lower my annual truck registration by a quarter as this is still a working truck.
Thanks guys
Geoff

roKWiz 04-02-2015 09:01 PM

1 Attachment(s)
I thought I might post a drawing of what I'm planning to do with the K100.

bushpilot 04-02-2015 10:22 PM

nice trucks !

Welcome !


All times are GMT -5. The time now is 07:41 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.