Renegade Lights
1 Attachment(s)
I have these two lights that don't work, or I don't know where the switch is for them if there is one. So I replace the bulb on one of these and nothing happened. So I tried the other one and nothing. Before I get the meter out and test them WHAT am I missing? I have had all the lights on nothing. All the lights off nothing. So? Can't believe both of them have quit. I on/off switch is on the wall plate.
Thanks for any help Sam |
Time to get a meter or test light out and start tracing wires.
|
Sounds like it me too Mntom.... this place is quiet...
Sam |
Yea, that it is. BUT you will get quality assistance here!
|
Not unusual for a switch to fail. I'd try to figure out what switch does nothing. Pull it out and test it with a volt meter or test light.
|
Your right bob but what made me wonder about something else could be the problem was both lights were not working.
|
Have you tried the switch on the light? Couldn't tell from your post, but the one in my toter has the switch on top. I put an led bulb in mine and it was a little finicky to get it working.
|
I found a wall switch...duh. made all the difference.
Thanks for all the input Sam Quote:
|
Quote:
|
All times are GMT -5. The time now is 02:54 PM. |
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.