Truck Conversion & Toterhome Community - View Single Post

solo318 · 05-31-2016, 08:59 AM

After much work with no noticeable progress. I finally have some pictures.
Now that the roof was on. I had to finish the bunk area above the cab. I slid the box back 4 ft. And installed a sheet of 16 gauge stainless to the bottom of the bunk area.

Click image for larger version

Name: 20160301_183841.jpg
Views: 15
Size: 104.0 KB
ID: 2334

Click image for larger version

Name: 20160301_183909.jpg
Views: 13
Size: 100.8 KB
ID: 2335

Click image for larger version

Name: 20160301_184030.jpg
Views: 15
Size: 105.0 KB
ID: 2336

Once we got that in place I got a sheet of 16 gauge plain steel and built the front of the box.

Click image for larger version

Name: 20160529_175100.jpg
Views: 11
Size: 102.3 KB
ID: 2337

Then I gutted the sleeper and cut my hole.

05-31-2016, 08:59 AM	#13
solo318 Senior Member Join Date: Jul 2015 Location: Central Florida Posts: 127	Status report Mr Sulu After much work with no noticeable progress. I finally have some pictures. Now that the roof was on. I had to finish the bunk area above the cab. I slid the box back 4 ft. And installed a sheet of 16 gauge stainless to the bottom of the bunk area. Once we got that in place I got a sheet of 16 gauge plain steel and built the front of the box. Then I gutted the sleeper and cut my hole.