View Single Post
Old 03-14-2016, 08:46 AM   #7
samcrimm
Senior Member
 
samcrimm's Avatar
 
Join Date: Sep 2015
Location: Tullahoma
Posts: 361
Default

Hotrod,
That connector will fit the battery screw down terminal......
Been thinking about a long wire hooked to it and me and meter on the other end looking for it.

Sam

Quote:
Originally Posted by hot rod View Post
The weird thing is that based on the length of the wire and the size of the terminal it does not look like it is meant to hook directly to a battery. Is there something else in the compartment that is within reach of the wire and the right size post for the terminal? What about empty screw holes where something like a breaker or switch used to be installed but is gone now? As to tracing the wire, first I would just visually try to see where a wire the same size and color jumps out of the harness, or at your main panel, before you start untaping things and pulling wire loom apart. If you are not sure if you found the right wire you can disconnect the other end and check with an ohm meter.
N
__________________
2005 Renegade #1204 42 footer Columbia M3200CH-435,12 speed auto Cat 12 kw Genset, Roadtrip Mission in-mot Dish Network, Washer dryer combo, Jeep Liberty toad,1973 Cessna Skylane,1955 Chev 210 Belair survivor
samcrimm is offline   Reply With Quote