Truck Conversion & Toterhome Community - View Single Post - Ford E350 Uhaul to Race Hauler conversion

2 Trick Rick · 11-06-2015, 04:51 PM

step one was removing all the metal brackets in the cube..

than found some really thick and cool "coin" rubber flooring that was cut and placed over the whole floor. I know Home Depot sells a diamond plate rubber floor, but I saw this is a NASCAR rig and liked the looks.

I than installed the ceiling in the lounge area with a 1/2" insulation board under the sheet of shinny white plastic board. Than we build the rough wall in place bolted to the floor and screwed to the walls and ceiling.

I used 2x3 for the walls thinking that extra 1" of room would help..each wall was bolted to the floor, screwed to the walls and ceiling. I than tied the corners together with truss locks to help reduce twisting.

11-06-2015, 04:51 PM	#4
2 Trick Rick Junior Member Join Date: Nov 2015 Location: Chesterfield Posts: 25	step one was removing all the metal brackets in the cube.. than found some really thick and cool "coin" rubber flooring that was cut and placed over the whole floor. I know Home Depot sells a diamond plate rubber floor, but I saw this is a NASCAR rig and liked the looks. I than installed the ceiling in the lounge area with a 1/2" insulation board under the sheet of shinny white plastic board. Than we build the rough wall in place bolted to the floor and screwed to the walls and ceiling. I used 2x3 for the walls thinking that extra 1" of room would help..each wall was bolted to the floor, screwed to the walls and ceiling. I than tied the corners together with truss locks to help reduce twisting.