View Single Post
Old 07-04-2005, 07:03 PM   #5
Guest
 
Posts: n/a
Default

Okay, I looked through the service manual to adjust the clutch. When I went to measure the clearance between the clutch brake and the release bearing, I found that the clutch brake was TOTALLY GONE.

I guess this is why the gears would not engage smoothly.

If I wanted to install a new clutch brake would I have to take the transmission out or is their a way to install it without removing the tranny. How much would something like this cost? Is their anything else I should replace while the tranny is removed, if it needs to be removed?
  Reply With Quote