Truck Conversion & Toterhome Community - View Single Post - FTLR FL-70, is it for me?

waywardfool · 06-22-2006, 09:05 PM

I'm looking at building DIY on a class 6 box truck. Looking at a 1999ish FL70 with 22 to 24' box. Nothing fancy by any means, just the basics to get around with a Jeep or truck or two.

I'd pull a loaded flatbed trailer on occassion, weight about 9200#, but rarely in mountains. For most trips, it would be configured with ramps to get a trail jeep into the back of the box (weight about 3650#).

This is for just me and spouse.

Basics will be:

rv door curbside
rv windows
generator 4k to 5k Diesel
fresh water 200 gal
gray tank 200 gal
incinolet toilet (or standard rv, then go to 125 gray, 75 black)
110v refridgerator
electric water heater
(boondocking would be very rare, would use genset in that case)
bathroom forward with 36x36 shower

bed would be able to breakdown and store forward, setup in rear vehicle loading area

eating table/chairs would be portable in rear vehicle loading area

+++QUESTIONS+++

Will this setup pull and tow OK for my needs?

Is the Incinolet the way to go (my big concern is the run time -- i'd hate to have to wait and run the generator 1.5 hours everytime we came back to the camper for a pee break)?

Can it be done and stay under the magic 26,000 combined? I already have CDL, but would really like to stay under 26k weighted. Take 26000, and subtract 11k (appx wt of FL70/24'box), subtract 1.6k (wt of 200gals water), subtract 1k (appx wt 2 occupants and belongings, subtract 9.2k (wt of towed load). That leaves 3200 lbs for interior walls and insulation, interior furnishings, built-ins, basic appliances, etc.

Is a converted truck like this accepted in most campgrounds? Or do I risk getting turned away? The FL70 would remain all-white, and orignal on the outside, but for adding windows and RV door.

THANKS

06-22-2006, 09:05 PM	#1
waywardfool Junior Member Join Date: Jun 2006 Posts: 7	I'm looking at building DIY on a class 6 box truck. Looking at a 1999ish FL70 with 22 to 24' box. Nothing fancy by any means, just the basics to get around with a Jeep or truck or two. I'd pull a loaded flatbed trailer on occassion, weight about 9200#, but rarely in mountains. For most trips, it would be configured with ramps to get a trail jeep into the back of the box (weight about 3650#). This is for just me and spouse. Basics will be: rv door curbside rv windows generator 4k to 5k Diesel fresh water 200 gal gray tank 200 gal incinolet toilet (or standard rv, then go to 125 gray, 75 black) 110v refridgerator electric water heater (boondocking would be very rare, would use genset in that case) bathroom forward with 36x36 shower bed would be able to breakdown and store forward, setup in rear vehicle loading area eating table/chairs would be portable in rear vehicle loading area +++QUESTIONS+++ Will this setup pull and tow OK for my needs? Is the Incinolet the way to go (my big concern is the run time -- i'd hate to have to wait and run the generator 1.5 hours everytime we came back to the camper for a pee break)? Can it be done and stay under the magic 26,000 combined? I already have CDL, but would really like to stay under 26k weighted. Take 26000, and subtract 11k (appx wt of FL70/24'box), subtract 1.6k (wt of 200gals water), subtract 1k (appx wt 2 occupants and belongings, subtract 9.2k (wt of towed load). That leaves 3200 lbs for interior walls and insulation, interior furnishings, built-ins, basic appliances, etc. Is a converted truck like this accepted in most campgrounds? Or do I risk getting turned away? The FL70 would remain all-white, and orignal on the outside, but for adding windows and RV door. THANKS