Truck Conversion & Toterhome Community - View Single Post

pjcnlv · 11-06-2004, 09:33 AM

<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by warpath:
Many of the conversion companies run 7' or 7 1/2' inside ceilings heights so your roof height will be 13' 2" plus at the top of the ac unit.

Bill <HR></BLOCKQUOTE>

I noticed your rig at http://truckhome.com/eve/forums?m=15...17&f=617607117

It looks to be a lot more "low profile" than most. What is the overall height of that rig sand the AC but including roof vents etc.?

I really want one of these rigs but, it must fit through my shop door. I am not parking it outside in the harsh desert climate. Raising the door another foot is out as well because the top of the door is near the roof line of the building.

If I went with an FL70 chassis could I see a height just under 12 feet?

I know that the Jayco Seneca on the GM chasis is 142 inches. I'd rather step up to a Renegade though.

11-06-2004, 09:33 AM	#7
pjcnlv Junior Member Join Date: Nov 2004 Posts: 10	<BLOCKQUOTE class="ip-ubbcode-quote"><font size="-1">quote:</font><HR>Originally posted by warpath: Many of the conversion companies run 7' or 7 1/2' inside ceilings heights so your roof height will be 13' 2" plus at the top of the ac unit. Bill <HR></BLOCKQUOTE> I noticed your rig at http://truckhome.com/eve/forums?m=15...17&f=617607117 It looks to be a lot more "low profile" than most. What is the overall height of that rig sand the AC but including roof vents etc.? I really want one of these rigs but, it must fit through my shop door. I am not parking it outside in the harsh desert climate. Raising the door another foot is out as well because the top of the door is near the roof line of the building. If I went with an FL70 chassis could I see a height just under 12 feet? I know that the Jayco Seneca on the GM chasis is 142 inches. I'd rather step up to a Renegade though.